Sapphire WRITE-PROTECT Drive Reader

The Sapphire WRITE PROTECT Drive Reader, equipped with an interface bridge that disables the WRITE function on the hardware level, allows accessing data on any 3.5" or 2.5" SATA hard drives without the risk of accidentally erasing or altering the content...

Features
  • Supports any 3.5" or 2.5" SATA I, II or III hard drives
  • Hot swap hard drive like tape cassette without restarting your system**
  • USB 3.0/2.0 connection
  • Rugged anodized aluminum construction

internal GigaNAS adapter

This internal GigaNAS adapter is a simple solution for custom build your own high high capacity Gigabit Network Attached Storage appliance. Come with all the necessary mounting brackets, this Giga NAS adapter can be mounted into any computer chassis ...

Features
  • Attach up to 16 storage devices onto LAN
  • > 85 MB/sec speed on 1G network
  • Support single drive volume over 16TB
  • Same folder can be set up for sharing over LAN or WAN simultaneously

Dual mSATA - SATA Adapter

Model: AD2MSAHDR
This Dual mSATA - SATA Adapter is designed to enable two mSATA (mini SATA) SSDs to be installed into the space of a 2.5" hard drive. The two mSATA SSD can be configured to form a single RAID volume...

Features
  • Install up to two mSATA (mini SATA) SSDs
  • The two mSATA cards can be configured as RAID ), RAID 1, BIG DRIVE (SPAN) or as two individual drives*
  • The resulted RAID volume can be used as direct replacement for 2.5" hard drive

1:9 M2 /SSD/HDD HS Duplicator PRO

Model: M2HU9HS-2S
This 1:9 M2 /SSD/HDD HS Duplicator PRO allows you to copy from one source media onto as many as nine (9) target media at one time. Comes bundled with ten (10) M2 flash drive kits to convert M2 (NGFF) card into a 2.5" SSD..

Features
  • Copy up to nine (9) M2 (NGFF) or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • The supported media can be mixed in the target slots - great for transferring content between 2.5" HDD/SSD, M2 (NGFF) or other type of flash media

1:5 M2 (NGFF) /SSD/HDD Duplicator

Model: M2HDUS5HS
This 1:5 Combo M2 (NGFF) and 2.5" SSD/HDD duplicator allows you to copy from one source media onto as many as five (5) target media at one time.

Features
  • Copy up to five M2 (NGFF) SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • The supported media can be mixed in the target slots - great for transferring content between M2 SSD and 2.5" SSD/HDD

1:9 mSATA /SSD/HDD HS Duplicator PRO

Model: MSHU9HS-2S
This 1:9 mSATA /SSD/HDD HS Duplicator PRO allows you to copy from one source media onto as many as nine (9) target media at one time...the source and target drive can be mSATA SSD, 2.5" SATA SSD or 3.5" SATA hard drive...

Features
  • Copy up to nine (9) mSATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • Supported source media: mSATA SSD, 2.5" SSD, 2.5" hard drive and 3.5" hard drive
  • Supported target media: mSATA SSD. 2.5" SSD and 2.5" hard drive

mini mSATA USB 3.0 Flash drive

Model: AEMSU3
This mini flash enclosure turns any mSATA SSD into a small USB 3.0 Flash drive. Construct in rugged anodized aluminum housing, this mini flash drive is about the size of typical cigarette lighter and weight less than 2 oz.

Features
  • Build your high speed Flash drive with mSATA SSD of your choice
  • High speed USB 3.0 - up to 5Gbps
  • Power directly from USB port
  • Size of a cigarette lighter

1:63 USB HDD / Flash Duplicator

Model: UDFH63
This 1:63 USB duplicator copies up to as many as sixty-three (63) USB storage devices at one time from a single USB source. Each USB port is designed to provide adequate power to operate self powered USB storage device...

Features
  • Copy from one USB drive to as many as sixty-three (63) USB drives at one time
  • Support following USB storage: hard drive, SSD, flash drive and all popular flash cards connecting to Flash readers

2.5" M2 (NGFF) SSD drive

Model: AD25M2SSD
The unique 2.5" NGFF (M.2) Flash drive is designed to enable M2 (NGFF)SSD card to be used as a direct replacement for a 2.5" SATA hard drive.

Features
  • Build your own 2.5" SATA SSD with NGFF (M.2) SSD of your choice
  • Replace 2.5" hard drive with low power and shock resistant mSATA SSD
  • Direct Notebook SATA hard drive replacement

SATA - M2 SSD adapter

This Addonics SATA - M2 SSD adapter enable connecting the M2 SSD to any SATA port inside a computer. Once the M2 SSD is mounted inside this SATA - M2 SSD adapter, it can be used just like a standard 7 mm or 9 mm 2.5" SATA hard drive...

Features
  • Connect M2 SSD into any SATA port
  • Support M2 (NGFF) in length of 30, 42, 60 and 80 mm
  • Replace any SATA hard drive with low power and shock resistant M2 (NGFF) SSD


Addonics RAID Tower III External Storage Device Review - 2014-04-30
"...The Addonics RAID Tower III is certainly a unit with a great deal of build quality and aesthetic appeal. I really like the idea of having a solid steel enclosure with a bit of added flash with the acrylic front panel. The LED activity lights give off the right amount of light ..."
View Article

Addonics eSATA PCI Express Add-On Card Review - 2014-04-25
"The Addonics ADSA6GPX1-2E is a great solution to those wanting an external eSATA connection with port multiplier capabilities. The build quality seems quite good, and I found no issues when installing the card..."
View Article