The Z Snap-in Mobile Rack, the Snap-In Mobile Rack installed inside the Z eSATA or eSATA/USB drive enclosure, is a convenient external removable hard drive system. When attached to system via USB 2.0 or a hot swappable eSATA port, hard drive of any capacity can be conveniently added or remove from the system, similar to a tape cassette. With eSATA connection, the hard drive in the Z Snap-in Mobile Rack can also be used as the main drive to boot your system and for running all your applications.
|
|||||
* Serial ATA hot swap feature works only with controllers basing on Silicon Image chip set from our in house testing. Other controllers that are not Silicon Image based may not support hot swap. You may consider adding one of the Addonics Serial ATA host controllers to your systems to ensure the hot swap capability. New controllers from Intel and other suppliers may finally support this feature. Please verify with your controller manufacturer if you need to have hot swap in your application. Hot swap is supported in Windows 2000 and XP only. On other OS, drive can be removed without crashing system. But replacing with a different drive can result in crashing the OS.
** Z Snap-In Mobile Rack with eSATA / USB 2.0 interface (ZSNESU) is only able to hot swap using the snap in key lock power switch through the USB connection. The eSATA connection will require disconnection and reconnection of the eSATA cable for the drive to be recognized or properly removed from the system.
| Supported Drive Type |
3.5" SATA or SATA II or SATA III hard drive |
| Supported Interface | eSATA or USB |
| Bezel Color: | black |
| Power source: | from power adapter |
| Supported OS |
|
| Dimensions: |
10.16 x 6.61 x 2.36 in. (258 x 168 x 60 mm) |
| Weight: | 3.55lbs. (1612g) |
| Supported File Systems: | FAT, FAT32, NTFS and HPFS |
| Warranty: | One Year |
System Requirements
