1U RAID Rack with rack mounted PM (R1R2ES)

1U RAID Rack Introduction

The Addonics 1U RAID Rack is a family of 1U Rackmount chassis with removable drive systems for easily adding and removing hard drives. Comes bundled with all the necessary connecting cables for attaching to your system, these RAID Racks are designed to accommodate as many as four 3.5" SATA hard drives. You can start your RAID Rack with as little as one hard drive and expand by adding more hard drives as your storage requirement grows. Depending on the model, the hard drives can be connected to the system with eSATA, USB 3.0 , mini SAS or Firewire cable. 

 

About This Model

The R1R2ES is a 1U RAID Rack that accomodates as many as four 3.5" SATA hard drives or 2.5" SATA hard drives using Addonics Snap-In 25 adatper. Comes built-in 5-port SATA Port Multiplier, the 4 drives can be configured as a RAID group or as independent drives. A fifth drive can be added to the RAID group by attaching an external eSATA drive to the device eSATA port on the back of the unit. The integrated Snap-In bay provides the convenience in adding or removing drives directly like tape cartridges from each bay without any special tool.

 

 

For a summary of the difference between various models of the 1U RAID Rack, please click on the comparsion chart

  • Connect to system via a single eSATA port (connecting cables included)
  • Install up to four 3.5" SATA hard drives of any capacity (drives not included)
    or 2.5" SATA hard drives using Addonics Snap-In 25 adatper 
  • Device eSATA port for adding another external eSATA drive to the RAID group or as a fifth individual drive
  • Drives are added or removed directly like tape cartridge from each removable snap-in bay without any special tool
  • Drives are connected inside to a 5-port Rack mount Port Multiplier, part # AD5SARPM-E
  • The four hard drives can be configured as RAID group via the RAID utility of the OS or the host controller 
  • OS independent, can be used on any system
  • Individual drive configuration requires connecting to a Port Multiplier compatible controller

 

Components list made up this model:
1U RAID Rack with built-in 5-port rack mounted PM and one 3-foot eSATA cable (AAESATA100C)

Options: Z drive enclosure with eSATA connection, Z5CSES

  • Rackmount chassis
    • 1U height
    • Constructed in heavy duty steel
    • 180 Watts 110/240 AC power supply
    • Three 40x40mm low noise cooling fans
  • Front Panel
    • LED displays - Power, HDD Activity
    • Power
    • Four Snap-In drive bay for 3.5" SATA HDD or 2.5" SATA HDD using optional Snap-In 25 (model: AE25SN35SA)
  • Rear panel
    • 2 eSATA ports
    • AC power socket
  • RAID and OS support depends on host controller
  • Weight: 9.95 lb (4.51 Kg)
  • Dimensions (W x L x H): 17.19 x 11.88 x 1.75 in. (436.5 x 301.75 x 44.45 mm)
  • Operating temperature and humidity: 0 - 60°C, 5 - 95% % RH non-condensing
  • Storage temperature and humidity: -20 - 70°C, 0 - 90% RH

*Note: For eSATA connection, the RAID RACK must be connected to a SATA controller with hot swap capability in order to add and remove drive without rebooting. Please consult your motherboard or the add-in card manufacturer to determine hot swap support on your SATA controller. All of the Addonics SATA Host Controllers are hot swap capable.

PRODUCTS

R1R2ES - (1U Rack with rack mounted PM)
R1R2ES    IU RAID Rack integrated with a rack mounted PM, AD5SARPM-E. Install up to four 3.5" SATA hard drive of any capacity. One eSATA port for attaching external eSATA hard drive as the fifth hard drive. Please review product web page for more detail http://www.addonics.com/products/r1r2es.php
Price: 289.00

ACCESSORIES

SRRAIL (A pair of sliding rails for Storage Rack)
content: A pair of sliding rails with mounting brackets and screws, user manual
Price: 59.00
AERD25SN35 (Snap-In 25 RAID)
Content: Snap-In 25 RAID enclosure unit and user guide
Price: 29.00
AAHDSA3T35 (3 TB, 3.5" SATA II hard drive only)
AAHDSA3T35 3 TB, 3.5" SATA II hard drive

Please note that we cannot guarantee a specific brand. The price is based on the best promotion and availability from one of the following manufacturers: Seagate, Western Digital, Hitachi or Samsung. Also due to price volatility of hard drive, this item is not returnable for refund.
Price: 106.25
AAHDSA2T35 (2 TB, 3.5" SATA II hard drive only)
AAHDSA2T35 2 TB, 3.5" SATA II hard drive

Please note that we cannot guarantee a specific brand. The price is based on the best promotion and availability from one of the following manufacturers: Seagate, Western Digital, Hitachi or Samsung. Also due to price volatility of hard drive, this item is not returnable for refund.
Price: 83.13
AE25SN35SA (Snap-In 25)
Snap-In 25 (2.5inch - 3.5inch adapter), User guide,
Price: 13.99
ADSA3GPX1-2E (2 eSATA ports, SATA II RAID5 PCI-E )
2 eSATA II RAID5/JBOD PCI Express controller, low profile bracket, Driver CD, User guide,
Price: 29.99
ADSA3GPX8-4E (4 eSATA II RAID5 8-lane PCI-E)
4 Port eSATA RAID5/JBOD PCI-E 8x Controller, Driver CD, User Guide.,
Price: 169.00
AAESATA100C (eSATA - eSATA cable, 100 cm.)
Content: 100 cm. eSATA connecting cable with eSATA connectors on both ends. Full compliance with eSATA specification. Great for connecting external storage device with eSATA connector to eSATA host controller.
Price: 9.00
AAESATA200C (eSATA cable, 200 cm (6 ft.))
Content: 200 cm. eSATA connecting cable with eSATA connector on both ends. Full compliance with eSATA specification. Great for connecting external storage device with eSATA connector to eSATA host controller.
Price: 13.99