1U RAID Rack with 4 eSATA connections (R14ES)

1U RAID Rack Introduction

The Addonics 1U RAID Rack is a family of 1U Rackmount chassis with removable drive systems for easily adding and removing hard drives. Comes bundled with all the necessary connecting cables for attaching to your system, these RAID Racks are designed to accommodate as many as four 3.5" SATA hard drives. You can start your RAID Rack with as little as one hard drive and expand by adding more hard drives as your storage requirement grows. Depending on the model, the hard drives can be connected to the system with eSATA, USB 3.0 , mini SAS or Firewire cable. 

 

About This Model

The R14ES is a 1U RAID Rack that accomodates as many as four 3.5" SATA hard drives or 2.5" SATA hard drives using Addonics Snap-In 25 adatper. The four drives  are connected to a system via four eSATA cables. The integrated Snap-In bay provides the convenience in adding or removing drives directly like tape cartridges from each bay without any special tool.

 

Review the comparsion chart for the difference between various models of the 1U RAID Rack

  • Connect to system via four eSATA cables (connecting cables included)
  • Install up to four 3.5" SATA hard drives of any capacity (drives not included)
    or 2.5" SATA hard drives using Addonics Snap-In 25 adatper 
  • Drives are added or removed directly like tape cartridge from each removable snap-in bay without any special tool
  • Drives are connected inside to a 4-port SATA - eSATA bridge (model: AD4ESASB)
  • The four hard drives can be configured as RAID group via the RAID utility of the OS or the host controller 
  • OS independent, can be used on any system

 

Components list made up this model:
1U RAID Rack with four eSATA connections to system and ,  four 3-foot eSATA cable (AAESATA100C)

  • Rackmount chassis
    • 1U height
    • Constructed in heavy duty steel
    • 180 Watts 110/240 AC power supply
    • Integrated triple 40x40mm low noise cooling fans
  • Front Panel
    • LED displays - Power, HDD Activity
    • Front accessible switches - Power On / Off
    • Four Snap-In drive bay for 3.5" SATA HDD or 2.5" SATA HDD using optional Snap-In 25 (model: AE25SN35SA)
  • Rear panel
    • four eSATA connectors
    • AC power socket
  • OS support depends on the host controller 
  • Weight: 9.95 lb (4.51 Kg)
  • Dimensions (W x L x H): 17.19 x 11.88 x 1.75 in. (436.5 x 301.75 x 44.45 mm)
  • Operating temperature and humidity: 0 - 60°C, 5 - 95% % RH non-condensing
  • Storage temperature and humidity: -20 - 70°C, 0 - 90% RH

 

*Note: For eSATA connection, the RAID RACK must be connected to a SATA controller with hot swap capability in order to add and remove drive without rebooting. Please consult your motherboard or the add-in card manufacturer to determine hot swap support on your SATA controller. All of the Addonics SATA Host Controllers are hot swap capable.

PRODUCTS

R14ES - (1U Rack with 4 eSATA ports)
Content: 1U RAID Rack equipped with 4 eSATA ports for connecting to computer, four 3-foot eSATA cable, power cord, user guide
Price: 269.00

ACCESSORIES

SRRAIL (A pair of sliding rails for Storage Rack)
content: A pair of sliding rails with mounting brackets and screws, user manual
Price: 59.00
AERD25SN35 (Snap-In 25 RAID)
Content: Snap-In 25 RAID enclosure unit and user guide
Price: 29.00
AAHDSA3T35 (3 TB, 3.5" SATA II hard drive only)
AAHDSA3T35 3 TB, 3.5" SATA II hard drive

Please note that we cannot guarantee a specific brand. The price is based on the best promotion and availability from one of the following manufacturers: Seagate, Western Digital, Hitachi or Samsung. Also due to price volatility of hard drive, this item is not returnable for refund.
Price: 122.50
AAHDSA2T35 (2 TB, 3.5" SATA II hard drive only)
AAHDSA2T35 2 TB, 3.5" SATA II hard drive

Please note that we cannot guarantee a specific brand. The price is based on the best promotion and availability from one of the following manufacturers: Seagate, Western Digital, Hitachi or Samsung. Also due to price volatility of hard drive, this item is not returnable for refund.
Price: 95.00
AE25SN35SA (Snap-In 25)
Snap-In 25 (2.5inch - 3.5inch adapter), User guide,
Price: 15.99
AAESATA200C (eSATA cable, 200 cm (6 ft.))
Content: 200 cm. eSATA connecting cable with eSATA connector on both ends. Full compliance with eSATA specification. Great for connecting external storage device with eSATA connector to eSATA host controller.
Price: 13.99
AD5EHPMEU3 (External Port Multiplier Ultra)
Package content: External Port Multiplier Ultra main unit, 5V 110/230V power adapter (AAPAC5V), 24" USB power cable (AAUSBPCP24), user guide
Price: 119.00
NAS40ESU (NAS 4.0 adapter)
Package content: NAS 4.0 unit, 5V 110/240V AC adapter, 6" CAT5e cable, User guide
Price: 89.00