|
Home > Products
> Host Controller > Multilane 4X PCI-X Controller
For Mac
Incorporating the latest SATA Multilane connector, the Multilane 4X PCI-X Controller for Mac not only provides the fast SATA performance but also supports connecting up to 4 SATA ports externally via a single Infiniband cable. Drives connected to this controller can be easily configured
as 4 individual ports with no RAID or with RAID 0 or RAID 1 using the Mac OS Disk Utility.
With the Multilane 4x PCI-X Controller for Mac, an external Disk Array storage system such as the Addonics Storage Tower or Mini Storage Tower can now be connected to a system with a reliable and clean cable management system.
Product Feature
- 4X Multilane connector with thumb screw for secure connection. Connect up to 4 external SATA devices to system via 1 Infiniband cable
- Maximum data transfer up to 3 Gbits/sec per port on PCI-X slot
- SATAI and SATA II compliant
- Use as a non-RAID or RAID controller. Create RAID 0 or 1 using the Mac OS Disk Utility.
- Fits standard height or low profile PC
- Silicon Image chip set SiI
3124
- Hot swap support - drive can be
removed and added without system shut down or restart*
- Backwards compatible to PCI slot
- Port Multiplier compatible
- Compatible with Mac OS X 10.4.x using Power G4 & G5, Windows 2000, Windows XP, Windows 2003 Server
*Hot swapping hard drive
has been tested on Windows OS only. When drives are configured as RAID
0 and certain RAID combination, the removal of the hard drive will result
in breaking the RAID set and result in data loss.
Part number and Pricing
| Model |
Description and Package Content |
Click shopping cart to
check price and order online |
ADS3GX4R5-MLM |
Package content:
4X SATA Multilane PCI-X controller for Mac, standard height bracket, low profile bracket, Driver CD, User guide
|
$99.99  |
Specifications
PCI-X model
- Compliant with PCI-X Specification, revision 1.0a
- Supports 133 MHz PCI-X with 64-bit data
- All registers appear in unified memory space
- Full-chip command completion status accessible with single PCI-X burst access
- I/O port access to register space
- Low Profile PCI form Factor
- Serial ATA (SATA) – 3.0 Gbps (300MB/s) and 1.5 Gbps (150MB/s)
- 48-bit LBA support
- Use as a non-RAID or RAID controller. Create RAID 0 or 1 using the Mac OS Disk Utility.
- Compliant with SATA 1.0, and ATA, SATA II Extensions to SATA 1.0:
- Port Multiplier with FIS-based switching
- Native Command Queuing with non-zero offsets
- Four independent DMA channels with 2KB FIFO per channel
- Independent command fetch, scatter/gather, and command execution
- Multimaster I2C interface
- Supports ATAPI devices: CD-ROM, DVD-ROM, etc.
- Supports hot-plug of SATA devices
- Supports spread spectrum clocking to reduce EMI
- JTAG Boundary Scan compliant with IEEE std 1149.1
- Supports First-party DMA commands for Native Command Queuing (NCQ)
- Plesiochronous, Single PLL architecture, 1 PLL for 4 ports
- Output Swing Control
- Supports four independent Serial ATA channels
- Independent Link, Transport, data FIFO, command fetch, scatter/gather, and command execution
- 31 Commands and Scatter/Gather Tables per Port
- Four Pin header on board for Device LED connection
- Protocol Override per Command
- Staggered Spin-up Control
- Drivers for Mac OS X 10.4.x, Windows 2000, XP and 2003 Server
System Requirement
- PC/AT or Compatible System
- One free PCI or PCI-X slot
- Pentium or greater
- Minimum 32 MB RAM
- 10 MB minimum free hard disk space
- One of the following operating systems: Mac OS X 10.4.x using Power G4 & G5, Windows 2000, Windows XP, Windows 2003 Server
|
|
