1:11 mSATA / 2.5" HDD / SSD Subcompact Duplicator

The Addonics family of mSATA / 2.5" HDD/SSD duplicator is an economical combo mSATA SSD and 2.5" HDD/SSD duplicator solution with choice of models for copying from three up to as many as eleven mSATA / 2.5" HDD/SSD at one time. There is no computer needed or complex software to operate. Just open the doors on the drive bays, load your master hard drive to the source bay and other hard drives of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.

 

About This Model

This 1:11 mSATA / 2.5" HDD/Flash Subcompact duplicator allows copying from one source media onto as many as eleven (11) mSATA SSD or 2.5" HDD/SSD at one time. Designed with removable drive trays, drives in 2.5" form factor are easily added or removed without any special tool, just like an ordinary cassette tape. Drive does not have to be secured to the drive tray for convenient loading and unloading from the duplicator. Using other optional Addonics 2.5" Flash drive kit, this duplicator can also be used for making copies of many common flash media as well as a great tool for transferring data among 2.5" HDD / SSD, M2 SSD, mSATA/mini mSATA SSD, CFast card, CF card, slim SATA and 1.8" HDD/SSD. 

 


Installing the mSATA SSD onto the 2.5" mSATA flash drive kit (also applies to mini mSATA SSD) 

        

 

The following Addonics optional 2.5" flash drive kits allow this duplicator to copy mSATA/mini mSATA, CFast, CF card or slim SATA SSD

(Shown with media side facing up)

M2 card in 2.5" M2 drive
kit (AD25M2SSD-N)

CFast card in 2.5" CFast 
drive kit (AD25CFASTD-N)

CF card in 2.5" CF drive kit
(AD25CFD-N)

Slim SATA SSD 2.5" HDD
adapter (AA25SEMBK)

2.5" HDD adapter for 1.8" drive
(AD18mSATA5S

note: the flash cards shown above are for illustration purpose and are not part of the flash drive adapter

 

Combo mSATA SSD / 2.5" HDD/SSD Duplicator family comparison chart

Copying options
From source
To target
$ $ $ $ $
mSATA or mini mSATA SSD mSATA or mini mSATA SSD
Yes, up to 5 targets
Yes, up to 9 targets
Yes, up to 9 targets
Yes, up to 11 targets
 Yes, up to 11 targets
mSATA or mini mSATA SSD 2.5" SATA HDD/SSD
Yes, up to 5 targets
Yes, up to 9 targets
Yes, up to 9 targets
Yes, up to 11 targets
 Yes, up to 11 targets
2.5" SATA HDD/SSD 2.5" SATA HDD/SSD
Yes, up to 5 targets
Yes, up to 9 targets
Yes, up to 9 targets
Yes, up to 11 targets
 Yes, up to 11 targets
2.5" SATA HDD/SSD mSATA or mini mSATA SSD
Yes, up to 5 targets
Yes, up to 9 targets
Yes, up to 9 targets
Yes, up to 11 targets
 Yes, up to 11 targets
3.5" SATA HDD/SSD mSATA, mini mSATA SSD or 2.5" SSD/HDD
NA
NA
Yes
NA
 NA
  • Copy up to eleven (11) mSATA/mini mSATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • Great for cloning hard drives, making back up hard drives, system upgrade or data distribution or for copying data between mSATA/mini mSATA and 2.5" HDD/SSD
  • Comes with twelve (12) units of 2.5" mSATA flash drive kits (AD25MSD-E) to convert mSATA/mini SATA SSD to 2.5" SSD
  • Source and 11 targets can be a mix of mSATA or 2.5" HDD/SSD
  • Compact size - slighty larger than a shoe box
  • Weight less than 10 lbs
  • Typical copying speed*
 Copying Speed
1 target 3 targets 4 targets or more
~ 105 MB/sec ~ 70 MB/sec ~ 50 MB/sec
  • Support any file system
  • Can also be used for duplicating other flash media - M2 SSD, CFast, CF, slim SATA and 1.8" HDD/SSD, using optional Addonics family of 2.5" Flash drive kit
  • Maximum storage capacity >3TB
  • Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD (this option may not be supported on some SSD or mSATA card)
    • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. 5220.22-M is the DoD standard for drive sanitization
  • LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be here Full LCD console feature list)
  • Operate as a stand alone appliance. No computer or software needed

The speed here is for reference only. The actual transfer rate varies depending on the speed of the source and destination drive


Components for the main unit
Storage Tower 3 (ST3), 1:11 HDD Duplicator subsystem (HDU11SAS), two (2) 2.5" Disk Array 6SA (AE6RT25S), 

  • Writing mode: Sector to Sector
  • Typical copying speed
 Copying Speed
1 target 3 targets 4 targets or more
~ 105 MB/sec ~ 70 MB/sec ~ 50 MB/sec
  • Sturdy metal frame construction
  • Drives are added or removed just like VHS cassette without tools via removable drive tray
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated 150W 110/240 power supply
  • Dimensions (W x D x H): 7.48 x 10.63 x 6.5 inch (190 x 270 x 165 mm)
  • Weight (main unit only): ~ 9.79 lb (4.44 Kg)
  • Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
  • Storage temperature and humidity: (-20) - (65) degree C, 0% - 95% RH non-condensing

Specification subject to change without notice

PRODUCTS

ACCESSORIES

AD25CFASTD-N (2.5" CFast HDD kit, open end, black )
Content: 2.5" CFast hard drive kit with open end black color bracket for easy media nstallation, user guide.
Price: 24.95
AD25M2SSD-E (2.5" M2 Flash drive kit PRO)
Content: 2.5" M2 (NGFF) SSD drive kit with easy media installation or removal design
Price: 24.95
AD25MSD-E (2.5" mSATA flash hard drive kit PRO)
Content: 2.5" mSATA flash memory hard drive kit for standard mSATA and mSATA mini (half size) SSD
Price: 24.95
AD25CFD-N (2.5" CF HDD PRO, easy media insertion and removal, black color)
Content: 2.5" CF hard drive kit with black color bracket and open end for easy media installation.
Price: 26.95
AD18M25S (1.8" micro SATA - 2.5" SATA HDD adapter)
Content: 1.8" micro SATA - 2.5" SATA HDD adapter,
Price: 19.00
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00