1:9 M2/mSATA /SSD/HDD Duplicator PRO

The Addonics family of Combo mSATA HDD duplicator is designed for making multiple copies of mSATA SSD or 2.5" SATA HDD/SSD from a single master drive. Each duplicator comes bundled with a set of 2,5" mSATA flash drive kit that turns a mSATA SSD into a 2.5" SATA SSD. You can mix and match the mSATA SSD and the hard drive into the duplicator, thus making it a handy tool for transferring the content between the mSATA card and 2.5" hard drive. There is no computer needed or complex software to operate. Just open the doors on the drive bays, load the master media into the source bay and the target media of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.


About this model

This 1:9 mSATA /SSD/HDD HS Duplicator PRO allows you to copy from one source media onto as many as nine (9) target media at one time. Comes bundled with ten (10) M2/mSATA flash drive kits to convert either M2 SATA or mSATA SSD into a 2.5" SSD, the target and source drive can be of either M2 SATA SSD, mSATA SSD or 2.5" SATA HDD/SSD. In addition, there is a source slot for using 3.5" hard drive as a master drive, a great solution for transferring content on 3.5" SATA hard drive to M2 SATA SSD, mSATA SSD or 2.5" SATA HDD. By adding other optional 2.5" flash drive adapters, the supported media can be expanded to include CFast card, CF card, slim SATA SSD and 1.8" HDD/SSD. Designed with snap-In drive bay, drives are easily added or removed without any special tool, just like an ordinary cassette tape.


Duplicator overview


Installing the M2 SATA SSD onto the 2.5" M2/mSATA flash drive kit 

2.5 CF Flash drive


Installing the mSATA card onto the 2.5" M2/mSATA flash drive kit

The following Addonics optional 2.5" flash drive kit can be used for duplicating CFast , CF card, slim SATA SSD or 1.8"  drive.

Show with media side facing up

CFast card in 2.5" CFast
drive kit (AD25CFASTD-N)

CF card in 2.5" CF drive kit

Slim SATA SSD 2.5" HDD
adapter (AA25SEMBK)

1.8" micro SATA - 2.5" SATA
HDD adapter (AD18M25S

note: the flash cards shown above are for illustration purpose and are not part of the flash drive adapter

  • Copy up to nine (9) of the following type of media: M2 SATA SSD, mSATA/mini mSATA SSD or 2.5" SATA HDD/SSD with drive thickness up to 9.5 mm
  • Supported source media: M2 SATA SSD, mSATA/mini SATA SSD, 2.5" SSD, 2.5" hard drive and 3.5" hard drive
  • Comes with ten (10) units of M2/mSATA flash drive kits (AD25M2MSA) to convert M2 SATA SSD or mSATA SSD to 2.5" SATA SSD
  • An easy source switch at the back of the unit for selecting 3.5" HDD or 2.5" HDD as the source slot
  • Additional support for CFast, CF, slim SATA SSD and 1.8" HDD/SSD with the following optional 2.5" flash drive kit -  AD25CFASTD-NAD25CFD-NAA25SEMBKAD18M25S
  • Typical copying speed*:
Copying Speed
1 target 3 targets 4 targets or more
~ 105 MB/sec ~ 65 MB/sec ~40 - 50 MB/sec
  • Support any file system
  • No drive capacity limitation
  • Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD (this option may not be supported on some SSD or mSATA card)
    • OVERWRITE - One pass, 3 passes, and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. 5220.22-M is the DoD standard for drive sanitization
  • LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be here Full LCD console feature list)
  • Operate as a stand-alone appliance. No computer or software needed

* The speed here is for reference only. The actual transfer rate varies depending on the speed of the source and destination drive


Bundled accessories: ten (10) units of 2.5" M2/mSATA flash drive kit (AD25M2MSA), power cord, user guide

  • Writing mode: Sector to Sector
  • Typical copying speed
 Copying Speed
1 target 3 targets 4 targets or more
~ 105 MB/sec ~ 65 MB/sec ~ 40 -50 MB/sec
  • Sturdy metal frame construction
  • Drives are added or removed just like VHS cassette without tools
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Two low noise high CFM ball bearing cooling fan
  • Integrated universal AC 110/240V power supply
  • Dimension: ~ 7.5 x 17.25 x 17.2 in. (90 x 438 x 437 mm.)
  • Weight: ~ 23.93 lb (10.85 Kg)
  • Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
  • Storage temperature and humidity: (-20) - (65) degree C, 0% - 95% RH non-condensing

Specification subject to change without notice


M2MSHD9-2S - (1:9 M2 /SSD/ HDD Duplicator PRO)
Content: 1:9 M2/mSATA/2.5" HDD/SSD Duplicator PRO main unit, ten (10) units of 2.5" M2/mSATA flash drive kit (AD25M2MSA), power cord, user guide
Price: 1559.00


AD25CFASTD-N (2.5" CFast HDD kit, open end, black )
Content: 2.5" CFast hard drive kit with open end black color bracket for easy media nstallation, user guide.
Price: 24.95
AD25CFD-N (2.5" CF HDD PRO, easy media insertion and removal, black color)
Content: 2.5" CF hard drive kit with black color bracket and open end for easy media installation.
Price: 26.95
AD18M25S (1.8" micro SATA - 2.5" SATA HDD adapter)
Content: 1.8" micro SATA - 2.5" SATA HDD adapter,
Price: 19.00
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00