Home > Products > Host Controller > Combo USB 2.0, Firewire and Serial ATA Host Controller

This Combo PCI card combines the three latest interface standards - USB 2.0, Firewire and Serial ATA with RAID 1 and RAID 0, all built into one PCI card. With this Combo card, you can save other PCI slots for future expansion or other add on cards. Installation is a snap as the card is fully plug and play under the latest Windows 98SE, Me, 2000 and XP.

Product Features

• Add 4 USB 2.0, 3 Firewire (IEEE 1394) ports and 2 Serial ATA ports to Desktop PC via one PCI slot
• The two Serial ATA ports can be configure to provide RAID 0 for high throughput or RAID 1 for fault tolerance storage system or as a non-RAID controller
• Plug and Play in Windows 98SE, Me, 2000 and XP
• Silicon Image SATA chip set SiI 3112
• Great for any USB, Firewire, Serial ATA Storage Devices, Digital video camcorder, scanners, printers, or any USB or Firewire peripheral devices
• USB and Firewire work under Windows 98SE, Me, 2000, 2000 Server and XP
• Serial ATA work under DOS, Windows 95, NT 4.0, 98SE, Me, 2000 and XP
• Self power for all Addonics Pocket devices via either USB or Firewire ports

Model and Pricing

Specifications

USB 2.0

• 3 external and 1 internal USB 2.0
• Connector: USB 4-pin DIP
• Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)
• Compliant with Open Host Controller Interface Specification for USB Rev 1.0a
• Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95
• USB 2.0 Drivers for Windows 98SE, Me, 2000, XP
• 2.5 Watt (5V, 500 mA) per port

Firewire (1394a)

• 2 external and 1 internal Firewire (1394a) ports
• Connector 6- pin DIP
• 100/200/400 Mbits/sec
• Compliant with IEEE 1394 Open Host Controller Interface specification release 1.1 and IEEE Std 1394a-2000
• Built-in FIFOs for isochronous transmit (2048 bytes), asynchronous transmit (2048 bytes), and receive (3072 bytes)
• 32-bit CRC generation and checking for receive/transmit packets
• Over-current protection per Firewire port up to 1.5A, 33V
• 12 Watt (12V, 1A) per port
  

High speed Serial ATA

• Two high speed serial ATA interface ports, each supporting 1st generation Serial ATA data rates
  (1,500 Mbits/sec)
• Build-in RAID 0/1
• Fully compliant with Serial ATA 1.0 specifications
• Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes
• Supports Spread Spectrum in receiver
• Features Serial ATA to PCI interrupt masking
• Features Watch Dog Timer for fault resiliency
  

Other specification

• Compliant with PCI Specification, revision 2.2
• Compliant with PCI Bus Power Management specification v1.1
• 32 bit, 33/66 MHz fully compliant PCI host interface
• Integrated PCI DMA engine
• USB and FireWire ports are plug and play for Windows XP, Mac OS X or greater Mac OS X or greater (at USB 1.1 speed only)
• Serial ATA plug and play under DOS, Windows 95, NT 4.0, 98SE, Me, 2000 and XP
• Requires one free PCI slot
• Dimension (W x D x H) - 167 mm x 20.1 mm x 90 mm
• 1 year warranty