About the 2.5" HDD/SSD Duplicator Series

The Addonics family of 2.5" duplicator is an economical hard drive duplicator solution with choice of models for copying from three up to as many as eleven 2.5" SATA hard drive or SSD. There is no computer needed or complex software to operate. Just open the doors on the drive bays, load your master hard drive to the source bay and other hard drives of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.

About This Model

The HDUS1125LT is a 1:11 HDD or SSD duplicator with integrated Snap-In Disk Array allowing hard drives to be easily added or removed from the system just like an ordinary cassette tape, without any special tool.

• Copy up to eleven 2.5" SATA hard drives or SSD
• Great for cloning hard drives, making back up hard drives, system upgrade and data distribution
• Support any file system
• Support any 2.5" SATA hard drive or SSD with thickness up to 12.7 mm
• Maximum drive size >3TB
• Typical copying speed*:

• Drive sanitization:
  • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
  • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M.  The duplicator writes a string of pattern over the entire disk one time, three times or seven times.5220.22-M is the DoD standard for drive sanitization
• LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list to see a complete list of this duplicator functions)
• Operate as a stand alone appliance. No computer or software needed

* The speed here is for reference only. The speed were measured basing on using 3.5" SATA III 250 GB hard drive for both source and target. The transfer rate varies depending on the speed of the source and destination drive

• Writing mode : Sector to Sector
• Typical copying speed:

• Sturdy metal frame construction
• Drives are added or removed just like VHS cassette without tools
• LCD display with functional control panel
• Well ventilated for efficient air flow.
• Low noise high CFM ball bearing cooling fan
• Integrated universal AC 110/240V power supply
• Dimension: 8.19 x 12.94 x 8 inch ( 208 x 329 x 203 mm)
• Weight: ~ 13.91 lb (6.31 Kg)
  
• Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
• Storage temperature and humidity: (-20) - (65) degree C, 0% - 95% RH non-condensing

Specification subject to change without notice