Home > HDD Duplicator > 1:9 Hard drive/SSD Duplicators > 1:9 HDD/SSD HS Duplicator (HD9SNDXHS)
1:9 HDD/SSD HS Duplicator (HD9SNDXHS)

About the 1:9 HDD Duplicator Series

The latest Addonics 1:9 HDD (Hard Disk Drive) Duplicator can copy as many as nine target drives from a single source, making this the ideal solution for production or data distribution applications. Addonics 1:9 HDD duplicator operates totally as a stand alone. There is no computer needed or complex software to operate. Set up is accessed via a LCM control panel on the front of the unit. Once configured, simply insert up to nine hard drives of equal or larger capacity than the master drive into the duplicator, load the master hard drive, lock the drive door and push the start button to start the copying process.

About This Model:

The HD9SNDXHS model is a High Speed 1:9 HDD/SSD duplicator that maintains a steady high performance copying from one to nine 3.5" or 2.5" SATA hard drive or SSD. Drives are loaded directly into the duplicator with no special tools required. The source or target drive can be either 3.5" or 2.5" SATA drive or SSD.


Install 3.5" SATA HDD directly into each drive bay or 2.5" SATA HDD using the 2.5" adapter (Snap-In 25)

Features highlight

  • Copy from one to nine 2.5"/3.5" SATA hard drives or SSD
  • Source drive and target drive can be 2.5" or 3.5" in any mix.
  • 3.5 drives are added or removed directly from the source or target bay without any tool
  • 2.5" drives are added via a 2,5" - 3.5" drive converter box, Snap-In 25 (model: AE25SN35SA). One Snap-In 25 is included in this model. Addition Snap-In 25 are required in order to copy more than one 2.5" SATA hard drive


1:9 HDD/SSD HS Duplicator familiy comparison chart

Copying options
From source
To target (up to 9)
3.5 SATA HDD 3.5" SATA HDD
Yes
Yes
NA
3.5" SATA HDD 3.5" IDE HDD (1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
Yes
NA
NA
3.5" SATA HDD 2.5" SATA HDD/SSD
Yes
Yes (see note 4 below)
NA
3.5" SATA HDD 2.5" IDE HDD/SSD (1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
Yes
NA
NA
3.5" IDE HDD 3.5" SATA HDD
Yes
NA
NA
3.5" IDE HDD 3.5" IDE HDD
option (see note 1 below)
NA
NA
3.5" IDE HDD 2.5" SATA HDD/SSD
Yes
NA
NA
3.5" IDE HDD 2.5" IDE HDD/SSD option (see note 1 below)
NA
NA
2.5" SATA HDD/SSD 3.5" SATA HDD
Yes
Yes
NA
2.5" SATA HDD/SSD 3.5" IDE HDD (1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
Yes
NA
NA
2.5" SATA HDD/SSD 2.5" SATA HDD/SSD
Yes
Yes (see note 4 below)
Yes
2.5" SATA HDD/SSD 2.5" IDE HDD/SSD(1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
Yes
NA
NA
2.5" IDE HDD/SSD 3.5" SATA HDD
Yes
NA
NA
2.5" IDE HDD/SSD 3.5" IDE HDD option (see note 1 below)
NA
NA
2.5" IDE HDD/SSD 2.5" SATA HDD/SSD
Yes
NA
NA
2.5" IDE HDD/SSD 2.5" IDE HDD/SSD
option (see note 1 and 2 below)
NA
NA
3.5" SATA HDD 3.5" SATA HDD with AES 256-bit hardware encryption
option (see note 3 below )
NA
NA
3.5" IDE HDD 3.5" SATA HDD with AES 256-bit hardware encryption
option (see note 3 below )
NA
NA
3.5" SATA HDD 2.5" SATA HDD/SSD with AES 256-bit hardware encryption
option (see note 3 below )
NA
NA
3.5" IDE HDD 2.5" SATA HDD/SSD with AES 256-bit hardware encryption
option (see note 3 below )
NA
NA
3.5" SATA HDD with AES 256-bit hardware encryption 3.5" SATA HDD
option (see note 3 below )
NA
NA
3.5" SATA HDD with AES 256-bit hardware encryption 3.5" IDE HDD
option (see note 3 below )
NA
NA
3.5" SATA HDD with AES 256-bit encryption 2.5" SATA HDD/SSD
option (see note 3 below )
NA
NA
3.5" SATA HDD with AES 256-bit hardware encryption 2.5" IDE HDD/SSD
option (see note 3 below )
NA
NA
2.5" SATA HDD/SDD with AES 256-bit hardware encryption 2.5" SATA HDD/SSD
option (see note 3 below )
NA
NA
2.5" SATA HDD/SDD with AES 256-bit hardware encryption 2.5" IDE HDD/SSD
option (see note 3 below )
NA
NA
Others
HDU11SITDR
HDUS11325DX
  
Drive is added or removed directly from drive bay without any special tool
NA
Yes
Yes
Drive is added or removed via removable drive enclosure
Yes
NA
NA
drive sanitization
Yes
Yes
Yes
weight 47.5 lb (21.5 kg)
42.35 lb (19.21 kg)
~ 11.4 lb (5.17 Kg)
Dimension 7.5 x 15.9 x 24.25 inch
(190.5 x 403.86 x 615.95 mm)
7.5 x 15.9 x 24.25 inch
(190.5 x 403.86 x 615.95 mm)
8.19 x 12.94 x 8 inch ( 208 x 329 x 203 mm)

Notes:

  1. requires additional Diamond IDE drive enclosure (model: DISCSB) for each target drive
  2. requires 2.5" to 3.5" IDE connector converter (AA25IDE35) for each target drive
  3. requires additional Diamond Cipher SATA drive enclosure (model: DCSACS256) in conjunction with your encryption key for each source or target drive. Please check the detail of the Diamond Cipher product at Diamond Cipher overview page if you are not familiar with this option.
    Data copied to a target drive inside the Diamond Cipher enclosure will be encrypted with AES 256-bit security. Data in the drive will not be accessible when remove from the drive enclosure. You can only access the encrypted data
    When Diamond Cipher enclosure is used as source, only hard drive that has been encrypted with the Addonics AES 256-bit encryption should be used. If an non-encrypted hard drive is placed inside the Diamond Cipher drive enclosure and use as a source drive, no data will be copied as the drive will appear as a blank drive to the duplicator.
  4. requires 1 additional Snap-In 25 (model: AE25SN35SA) unit for each target drive
  • Great for cloning hard drives, making back up hard drives, system upgrade or data distribution
  • Copy from one to nine  3.5" SATA hard drives or 2.5" SATA HDD/SSD
  • Source drive and target drive can be 2.5" or 3.5" in any mix.
  • High performance with minimum performance degradation from duplicating 1 to 9 drives 

    typical copying speed*
    1 drive 3 drive > 5 drives
    ~ 105 MB/sec ~87 MB/sec ~87 MB/sec
  • 3.5 drives are added or removed directly from the source or target bay without any tool
  • 2.5" drives are added via a 2,5" - 3.5" drive converter box, Snap-In 25 (model: AE25SN35SA). One Snap-In 25 is included in this model. Addition Snap-In 25 are required in order to copy more than one 2.5" SATA hard drive
  • Support any type of file format
  • Maximum drive size >3TB
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
    • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M.  The duplicator writes a string of pattern over the entire disk one time, three times or seven times.5220.22-M is the DoD standard for drive sanitization
  • LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list to see a complete list of this duplicator functions)
  • Operate as a stand alone appliance. No computer or software needed

* The speed here is for reference only. The speed were measured basing on using 3.5" SATA III 250 GB hard drive for both source and target. The transfer rate varies depending on the speed of the source and destination drive

  • Writing mode : Sector to Sector
  • Typical copying speed

    typical copying speed*
    1 drive 3 drive > 5 drives
    ~ 105 MB/sec ~87 MB/sec ~87 MB/sec
     
  • Sturdy metal frame construction
  • Snap-In drive bay for easy drive insertion or removal with no special tool
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated 500W 110/240 auto-sense power supply
  • Dimensions 7.5 x 16.7 x 17.2 inches
  • Weight: 29.8 lb (13.52 Kg)
  • Operating environment: 0 - 60 degree C, 15% - 90% RH
  • Storage environment: (- 20) - (65) degree C, 0% - 95% RH non-condensing

PRODUCTS

HD9SNDXHS - (1:9 HDD/SSD HS Duplicator Deluxe-C)
HD9SNDXHS   1:9 HDD High Speed Duplicator Deluxe-C. Make exact copy up to nine 3.5" or 2.5" of SATA hard drive/SSD or any combination.

Main components that make up this duplicator: Storage Tower IX (model: ST9), 1:9 High Speed HDD/SSD duplicator subsystem (model: HDU9SASHS), 2 units of Snap-In Disk Array (model: AESN5DS35), 1 unit of Snap-In 25 (model: AE25SN35SA), power cord and user guide.
Shop Online
Price: 1259.00

ACCESSORIES

AE25SN35SA (Snap-In 25)
Snap-In 25 (2.5inch - 3.5inch adapter), User guide,
Shop Online
Price: 15.99
AERD25SN35 (Snap-In 25 RAID)
Content: Snap-In 25 RAID enclosure unit and user guide
Shop Online
Price: 39.00
Datasheets
1:9 HDD/SSD HS Duplicator
Applies to:
Userguides
HD9SNDXHS.pdf
Drivers
1:9 High Speed HDD duplicator firmware
Applies to: HDU9SASHS, HD925HS, HD9SNDXHS, HD9SITDRHS

firmware verison 1.61S

Firmware update procedure (Requires one hard drive containing the firmware file):

  1. Create a 50MB HDD partition with FAT/FAT32 or NTFS files system on any SATA hard drive
  2. Download the firmware and unzip the file to .BIN file format
  3. Copy the .BIN file onto the 50 MB partition of the HDD
  4. Insert this drive to the Source slot of the duplicator. For subsystem, connect the drive to the Source SATA port
  5. Select "Firmware Update" function under the "Setup" or "Advanced Setup" menu and press ENT to do the update. To access the "Advanced Setup", hold onto the ESC button for 5 seconds. The new option will appear
  6. Once completed, it will reboot and show you the new firmware version

Please note that some drives may become locked and cannot be initialized after the SECURE ERASE or OVERWRITE. Should this happen, use the following procedures to unlock the drive:

  1. Place drive in the source slot
  2. Execute "PreScan" function for 1 minute
  3. Press "ESC" key until you see "User Abort" on the LCD screen
  4. Now remove the drive from the duplicator and connect it to your system, the HDD should be recognized and be able to initialize again