Home > Products > Duplicator Systems > 1:3 HDD Duplicator

Duplicate any SATA or IDE HDD in 3.5" or 2.5" form factor

The Addonics 1:3 HDD Duplicator comes with choice of two models: the PRO and the Deluxe. The Deluxe model enables duplicating any 3.5" or 2.5" SATA hard drive. The Pro model is a very flexible one to three hard drive duplicator that makes copying any 3.5" SATA or IDE hard drive to three 3.5" SATA hard drives fast and easy. Any 2.5" or 3.5" hard drive or SSDs can be placed inside the easily removable drive enclosures for used as source or target drive. With optional additional IDE drive enclosures, practically any hard drives or SDDs with IDE or SATA interface or in 2.5" and 3.5" form factor can all be mixed in the three target drive bays to be duplicated at one time. By adding an optional Diamond Cipher drive enclosure, you can easily make backup of sensitive data with bullet proof AES-256 bit encryption.

Addonics HDD duplicator operates totally stand alone. There is no computer needed or complex software to operate. All the set up are accessed via a LCM control panel on the front of the unit. Once configured, simply insert up to 3 hard drives of capacity equal or larger than the master drive into the duplicator, load the master hard drive, lock the drive door and push the start button to start the copying process.

Product Features

  • Great for cloning from one to three hard drives or for making a back up hard drive.
  • OS independent
  • Copy up to 1.5 Gbps depending on the performance of the hard drive
  • Completely standalone onne to three hard drive duplicator with no additional hardware or software required.
  • LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be here)
  • Operate as a stand alone appliance. No computer or software needed
  • Full LCD console feature list
1:3 HDD Duplicator Pro
(HDUSI3TDR)		 1:3 HDD Duplicator Deluxe
(HDUS3325DX)

 

 

 

1:3 HDD Duplicator Pro (HDUSI3TDR)

  • Copy a 3.5" or 2.5" SATA or IDE hard drive/SSD to up to three 3.5" or 2.5" of SATA or IDE hard drive/SSD or any combination
  • Source and Destination drives are added or removed like tape cartridges via drive enclosure from each drive bay. Source drive enclosure and target drive enclosure are interchangeable.
  • Unit comes bundled with following drive enclosures:
    • 4 SATA drive enclosures - 1 for source and 3 for target
    • 1 IDE drive enclosure - can be used as source or target
  • Optional additional Diamond IDE drive enclosure, 2.5" to 3.5" IDE connector converter and Diamond Cipher drive enclosure

1:3 HDD Duplicator Deluxe (HDUS3325DX)

  • Copy a 3.5" or 2.5" SATA hard drive to up to three 3.5" or 2.5" SATA hard drives
  • Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required.
  • Unit comes bundled with one Snap-In 25 - can be used as source or target for 2.5" SATA drive. Additional Snap-In 25 units can be purchased to support copying up to three 2.5" SATA drives

 

Supported drive copying options

From source
To target (up to 3)
HDUSI3TDR
HDUS3325DX
3.5 SATA HDD 3.5" SATA HDD
Yes
Yes
3.5" SATA HDD 3.5" IDE HDD (1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
Yes
NA
3.5" SATA HDD 2.5" SATA HDD/SSD
Yes
Yes (see note 4 below)
3.5" SATA HDD 2.5" IDE HDD/SSD (1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
Yes
NA
3.5" IDE HDD 3.5" SATA HDD
Yes
NA
3.5" IDE HDD 3.5" IDE HDD
option (see note 1 below)
NA
3.5" IDE HDD 2.5" SATA HDD/SSD
Yes
NA
3.5" IDE HDD 2.5" IDE HDD/SSD option (see note 1 below)
NA
2.5" SATA HDD/SSD 3.5" SATA HDD
Yes
Yes
2.5" SATA HDD/SSD 3.5" IDE HDD (1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
Yes
NA
2.5" SATA HDD/SSD 2.5" SATA HDD/SSD
Yes
Yes (see note 4 below)
2.5" SATA HDD/SSD 2.5" IDE HDD/SSD(1 target only, two or more IDE targets require additional enclosures as show in note 1 below)
Yes
NA
2.5" IDE HDD/SSD 3.5" SATA HDD
Yes
NA
2.5" IDE HDD/SSD 3.5" IDE HDD option (see note 1 below)
NA
2.5" IDE HDD/SSD 2.5" SATA HDD/SSD
Yes
NA
2.5" IDE HDD/SSD 2.5" IDE HDD/SSD
option (see note 1 and 2 below)
NA
3.5" SATA HDD 3.5" SATA HDD with AES 256-bit hardware encryption
option (see note 3 below)
NA
3.5" IDE HDD 3.5" SATA HDD with AES 256-bit hardware encryption
option (see note 3 below)
NA
3.5" SATA HDD 2.5" SATA HDD/SSD with AES 256-bit hardware encryption
option (see note 3 below)
NA
3.5" IDE HDD 2.5" SATA HDD/SSD with AES 256-bit hardware encryption
option (see note 3 below)
NA
3.5" SATA HDD with AES 256-bit hardware encryption 3.5" SATA HDD
option (see note 3 below)
NA
3.5" SATA HDD with AES 256-bit hardware encryption 3.5" IDE HDD
option (see note 3 below)
NA
3.5" SATA HDD with AES 256-bit encryption 2.5" SATA HDD/SSD
option (see note 3 below)
NA
3.5" SATA HDD with AES 256-bit hardware encryption 2.5" IDE HDD/SSD
option (see note 3 below)
NA
2.5" SATA HDD/SDD with AES 256-bit hardware encryption 2.5" SATA HDD/SSD
option (see note 3 below)
NA
2.5" SATA HDD/SDD with AES 256-bit hardware encryption 2.5" IDE HDD/SSD
option (see note 3 below)
NA

Note:

  1. requires additional Diamond IDE drive enclosure (model: DISCSB) for each target drive
  2. requires 2.5" to 3.5" IDE connector converter (AA25IDE35) for each target drive
  3. requires additional Diamond Cipher drive enclosure (model: DCSACS256) for every source or target drive.
    Data copied to a target drive inside the Diamond Cipher enclosure will be encrypted with AES 256-bit security. Data in the drive will not be accessible when remove from the drive enclosure. For detail of Diamond Cipher feature, please visit Diamond Cipher overview page.
    If an non-encrypted hard drive is placed inside the Diamond Cipher drive enclosure and use as a source drive, no data will be copied as the drive will appear as a blank drive to the duplicator.
  4. requires 1 additional Snap-In 25 (model: AE25SN35SA) unit for each target drive

Model and Pricing

Model
 Description and Package Content
Click shopping cart to check price and order online
HDUSI3TDR

Package content:
1:3 HDD Duplicator Pro, 4 Diamond SATA drive enclosures (model: DSACSB), 1 Diamond IDE drive enclosure (model: DICSB), 1 2.5" -3.5" IDE connector converter (model: AA25IDE35), AC power cord, User guide

$899 Cart
HDUS3325DX

Package content:
1:3 HDD Duplicator Deluxe, power cord, User guide

$799 Cart


Optional accessories

Model
 Description and Package Content
Click shopping cart to check price and order online
DICSB

Diamond IDE drive enclosure

$34.99 Cart
DSACSB

Diamond SATA drive enclosure

$24.99 Cart
DCSACS256

Diamond SATA drive enclosure with AES-256 bit encryption

$79 Cart
AE25SN35SA

Snap-In 25
Package content: Snap-In 25 (2.5" - 3.5" converter box), User guide

$15.99 Cart
AA25IDE35
 2.5" to 3.5" IDE connector converter

$4.99 Click to check price and shop online

Specification

  • Writing mode : Sector to Sector
  • Support up to 1.5 Gbps transferring rate (actual transfer rate depends on the speed of the source and destination drive)
  • Sturdy metal frame construction
  • Removable drive enclosures for quick insertion and removal of hard drives.
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated 80W 110/240 auto-sense power supply
  • Dimensions - 7.5 x 16 x 10.4 inch (W x D x H)
  • Weight: 17.43lb (7.9kg)
  • Operating environment: 0 - 50 degree C, 15% - 90% RH
  • Storage environment: - 20 - 85 degree C, 0% - 95% RH non-condensing

Specification subject to change without notice

 




 
Printable Version
 
Printable Version



 
 
 
 Copyright © 1998 - 2010 Addonics Technologies, Inc.  All Rights Reserved.