1:10 CF Duplicator PRO-A

The Addonics CF or CFast Duplicator is a family of fast and economical equipment for making copies of CF or CFast media. Choose from an array of models that allows you to duplicate 4, 5 or even 10 media at a time. The CF/CFast Duplicator is also easy to operate.  Simply insert the source media into the source slot and target media with equal or larger capacity into the destination slots, then push the copy button to start the copying process. There is no complicated software to run.

About this model

This 1:10 CF Duplicator PRO-A model allows you to copy from one CF or CFast card onto as many as ten CF cards at one time. Comes bundled with ten (10) 2.5" SATA CF adapters, the 10 CF target media are loaded onto these adapters which are in turn inserted into the ten 2.5" HDD slots. So the 10 target slots can be used for copying from CF or Cfast media onto 2.5" SATA HDD or SSD. Using one of the Addonics 2.5" flash drive kits, target slot can also be used for duplicating M2 SATA SSD, mSATA/mini mSATA SSD, slim SATA SSD or 1.8" SATA SSD. The support for such a wide range of storage media makes this duplicator a perfect equipment for content distribution using CF media or for transferring content from CFast card to CF card, 2.5" HDD and many common SSD media.

Front view   Rear view
       


Installing CF card into the 2.5" SATA-CF adapter (model: AD25CFD-N)

CF card can be inserted into or removed from the adapter directly
2.5 CF Flash drive installation


The following Addonics optional 2.5" flash drive kit can be used for duplicating CFast , M2 SSD, mSATA/mini mSATA SSD, slim SATA SSD or 1.8"  drive.

Show with media side facing up

CFast card in 2.5" CFast
drive kit (AD25CFASTD-N)

2.5" M2/mSATA SSD drive
kit (AD25M2MSA)

 

Slim SATA SSD 2.5" HDD
adapter (AA25SEMBK)

1.8" micro SATA - 2.5" SATA
HDD adapter (AD18M25S

note: the flash cards shown above are for illustration purpose and are not part of the flash drive adapter

  • Make copy from any type of CF* or CFast card
  • Duplicate from one up to ten CF cards at one time
  • Source CF slot is compatible with CF-I, CF-II and Micro Drive™
  • Simple source switch for selecting CFast slot or CF slot as the source
  • Come with ten (10) 2.5" SATA-CF adapters (model: AD25CFD-N) for the CF target media
  • Ten (10) target slots can be used for duplicating 2.5" HDD/SSD
  • Using Addonics family of 2.5" flash drive kits, the target slot can also be used for duplicating M2 SATA SSD, mSATA/mini mSATA SSD, slim SATA SSD or 1.8" SATA SSD.
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD (this feature may not be supported by some CFast and CF media)
    • OVERWRITE - One pass, 3 passes, and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. 5220.22-M is the DoD standard for drive sanitization
  • Completely standalone with no additional hardware or software required
  • Copy speed up to 105 MB/sec depending on the performance of the media
  • OS independent
  • LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list  in this duplicator)
  • Green LED for both source and destination slots to indicate media access

 

* not compatible with CF media that operate in PIO mode only

 


  • Writing mode: Sector to Sector
  • Typical copying speed
 Copying Speed
1 target 3 targets 4 targets or more
~ 105 MB/sec ~ 70 MB/sec ~ 50 MB/sec
  • Sturdy metal frame construction
  • Drives are added or removed just like VHS cassette without tools
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated 340W 110/240 auto-sense power supply
  • Dimensions (W x D x H): 7.5 x 16 x 10.4 inch (190 x 406 x 264 mm)
  • Weight: ~ 17.2 lb (8.8 Kg)
  • Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
  • Storage temperature and humidity: (-20) - (65) degree C, 0% - 95% RH non-condensing

Specification subject to change without notice

PRODUCTS

CFD10A-2S - (1:10 CF duplicator PRO with CF and CFast source selection)
Content: 1:10 CF Duplicator with CF and CFast slot main unit, ten (10) 2.5" CF flash drive kit (AD25CFD-N), power cord, user guide
Price: 1450.00

ACCESSORIES

AD25CFASTD-N (2.5" CFast HDD kit, open end, black )
Content: 2.5" CFast hard drive kit with open end black color bracket for easy media nstallation, user guide.
Price: 24.95
AD25CFD-N (2.5" CF HDD PRO, easy media insertion and removal, black color)
Content: 2.5" CF hard drive kit with black color bracket and open end for easy media installation.
Price: 26.95
AD18M25S (1.8" micro SATA - 2.5" SATA HDD adapter)
Content: 1.8" micro SATA - 2.5" SATA HDD adapter,
Price: 19.00
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00
AD25M2MSA (2.5" M2 / mSATA Flash drive kit)
Content: 2.5" M2 / mSATA flash drive kit with easy media installation or removal design (black color), user guide
Price: 27.95