The Addonics IDE CF adapter is the ideal solution for industrial PC, embedded system or applications that required a simple and economical bootable CF slot. Designed to connect directly to the ubiquitous IDE port, the small form factor of this IDE CF adapter can be easily mounted inside a standard 3.5" drive bay, PCI slot or anywhere inside the system. Also available now is the SATA CF adapter for faster performance and more flexibility
If you have a PowerBook or iBook with an IDE bus and have outgrown its hard drive, want to reduce the 'Book's weight by several ounces, would like to run more quietly, or simply like to tinker, the Addonics CF Hard Drive Adapter could be worthwhile investment - especially if you have some CF cards that aren't being used.
View articleADDONICS will please everyone with this Compactflash to IDE interface that allows booting any OS on Earth from a microdrive or CF memory card, but does so using a Serial-ATA connection.
View articleBoot any OS on Earth from a CF card or Microdrive. The adapter's construction is good, the price is right, and the ability to turn it from a front side bay adapter to one hidden in the back via the included PCI bracket is a nice bonus.
View article* CF Type II or MicroDrive can only be installed into the CF1 position of the adapter.
**Media must be in the device during boot up. Media is not hot swappable
Interface: |
IDE | |||
Supported media | Compact Flash Type I/II, Micro Drive (see Micro Drive limitations FAQ) | |||
Maximum Read / Write Speed: | Depends on the media | |||
OS Support: | DOS, Windows 3.1, NT, 98SE, Me, 2000, XP, Vista, Windows 7, Mac OS 8.6 or higher, Linux | |||
Dimensions: | adapter: 3.18 x 2.44 x .35 in (81 x 62 x 9 mm) 3.5" bay frame: 4.02 x 3.82 x 1 in (102 x 97 x 25 mm) |
|||
Power: | +5V from PC power supply | |||
Storage Temperature: | -20 °C to + 60 °C | |||
Storage Humidity: | 5 - 90% | |||
Warranty: | One Year |