This new Addonics PCI-E combo controller enable the addition of 2 SATA ports and 1 IDE channel all via one single PCI-Express 1X slot. For added fleixibility, the two SATA ports can be configured as eSATA (external SATA) or internal SATA ports. The built-in RAID firmware supports various RAID setting for the two SATA ports and the IDE channel and can also combine both the SATA and IDE hard drives into one RAID set. Together with support for Port Multiplier on the two SATA ports, this combo controller is really feature rich and also priced attractively..

• Connect up to 2 SATA or 2 eSATA devices or a combination of one device each
• Connect up to 2 IDE or ATAPI devices
• Create RAID 0, 1, 0+1(when using both SATA/eSATA and IDE devices), JBOD, and individual drives
• Install in PCI-Express 1x BUS
• Fully compliant with SATA II and SATA 1.0 standard
• Maximum 3Gbits/sec per port
• Support NCQ commands
• Compatible with Port Multiplier
• Compatible with Windows 2000, XP, 2003, Vista 32bit, Vista 64bit, Linux (2.4 kernel and higher)
• Hot swap support - drive can be removed and added without system shut down or restart *
• List of Linux Distributions compatible with Addonics SATA Host Controllers

• Compliant with 1-lane 2.5Gbps PCI Express specification
• Compliant with Serial ATA 1.0 specification
• Supports Serial ATA Generation 2 transfer rate of 3.0Gbps
• Supports Native Command Queuing (NCQ) on SATA ports
• Supports Port Multiplier with Command-based Switching on SATA ports
• Provides three independent channels to connect two SATA and one PATA hard disk drive
• Supports up to UDMA6 transfer mode of IDE
• Supports ATAPI devices through both IDE and SATA connection
• Supports up to 4 storage devices simultaneously
• Supports RAID 0, 1, 0+1, JBOD, and individual drives
• The operation temperature: 0 C ~ 55 C
• Storage temperature: -20 ~ 85 C
• Hot-plug capability
• Supports Windows 2000, XP, 2003, Vista 32bit, Vista 64bit
• RoHS Compliant

PRODUCTS

ADI2S3GPX1-2E - (2 eSATA/SATA II, IDE RAID PCI-E )

SATA/IDE RAID PCI-E Controller, Driver CD, User guide,

Shop Online

Price: 29.99

ACCESSORIES

AASA2SAP15C (eSATA - SATA converter cable, 15 cm)

AASA2SAP15C Converter cable for adapting external standard SATA cable to the new External SATA (eSATA) connector. Require additional SATA cable to connect to standard SATA devices. This adapter cable is ideal for connecting SATA storage devices to controllers with eSATA ports such as the Addonics 4-port External SATA II PCI-X controller ADS3GX4R5-E.

Shop Online

Price: 9.00

AASAEDC3F (External SATA data cable, 100 cm.)

AASAEDC3F 100 cm. external Serial ATA cable with standard SATA conncectors on both ends of the cable. Constructed with heavy duty shielding and connector to ensure reliable connection to external data storage devices.

Shop Online

Price: 9.00

AASA2SA100C (External eSATA - SATA cable, 100 cm)

AASA2SA100C eSATA to SATA connecting cable, 100 cm. eSATA connector on one end and heavy duty SATA1 (regular SATA connector) on another end. Great for connecting external SATA storage device to eSATA port.

Shop Online

Price: 12.99

AAESATA100C (eSATA - eSATA cable, 100 cm.)

AAESATA100C 100 cm. eSATA connecting cable with eSATA connectors on both ends. Full compliance with eSATA specification. Great for connecting external storage device with eSATA connectors to eSATA host controller.

Shop Online

Price: 9.00

AAESATA200C (eSATA cable, 200 cm (6 ft.))

AAESATA200C 200 cm. eSATA connecting cable with eSATA connector on both ends. Full compliance with eSATA specification. Great for connecting external storage device with eSATA connectors to eSATA host controller.

Shop Online

Price: 13.99