Sub Category List
DISPLAY STYLE
PRODUCT FILTER
Reset
Show All
RAID Tower IX

The RAID Tower IX is constructed in a precision machined steel metal chassis with a stylish front bezel. Comes with nine (9) 5.25" drive bays, a strong power supply and two low noise high CFM cooling fans, this RAID Tower can support up to fifteen (15) 3.5" hard drives with plenty of power and effective cooling. There are choice of models for connecting to the computer via high speed eSATA, USB 3.0 / 2.0 or mini SAS connection. Depending on model, you can also share the storage on the RAID Tower on LAN by attaching to the optional Addonics NAS adapter. Each model comes with everything needed for connecting to the computer. All is needed is to add your own hard drives and attached the connecting cables between the RAID Tower and the system.

RAID Tower IX
RAID Tower IX  with 6G PM thumbnail

RAID Tower IX with 6G PM

Model: RT93SNE6G
This RAID Tower supports connecting up to fifteen 3.5" SATA drives to system with throughput up to 6 Gbps via three eSATA cables. With the three Snap-In Disk Arrays, drive can be added or removed like tape cartridges...

  • Install up to fifteen 3.5" SATA drives of any capacity
  • Drives are directly added or removed like tape cartridge from each drive bay with no special tool
  • Connect to system via three eSATA or USB 3.0/2.0 ports
RAID Tower IX 6G thumbnail

RAID Tower IX 6G

Model: RT93SN6GMS
This family of RAID Tower IX supports up to 15 3.5" SATA drives, uses Snap-In Disk Arrays for adding or removing drives directly like tape cartridges from each bay without any special tool, and one mini SAS connection...

  • Connect up to fifteen 3.5" SATA hard drives of any capacity to system with a mini SAS (SFF-8088) port
  • Maximum throughput up to 6Gbps (SATA 3)
  • Drives are directly added or removed like tape cartridge
RAID Tower IX (RT93SNDHMS) thumbnail

RAID Tower IX (RT93SNDHMS)

This family of RAID Tower IX supports up to 15 3.5" SATA drives, uses Snap-In Disk Arrays for adding or removing drives directly like tape cartridges from each bay without any special tool, and one mini SAS connection to the computer.

  • Install up to fifteen 3.5" SATA drives of any capacity
  • Drives are directly added or removed like tape cartridge from each drive bay with no special tool
  • Connect to system via one mini SAS cable
RAID Tower IX (RT93DAHXMS) thumbnail

RAID Tower IX (RT93DAHXMS)

The RT93DAHXMS supports up to 15 3.5" SATA drives, uses Disk Array 5SA for drives installed onto drive trays that can be added or removed like tape cartridge from each drive bay, and one mini SAS connection to the computer.

  • Install up to fifteen 3.5" SATA drives of any capacity
  • Drives are installed onto drive trays that can be added or removed like tape cartridge from each drive bay
  • Connect to system via one mini SAS (SFF-8088) connection
RAID Tower IX (RT93SDEU3) thumbnail

RAID Tower IX (RT93SDEU3)

The RT93SDEU3 supports up to fifteen 3.5" SATA drives. which can be added or removed directly like tape cartridges from each bay without any special tool. The fifteen drives are connected to system via three eSATA or USB 3.0/2.0 ports

  • Install up to fifteen 3.5" SATA drives of any capacity
  • Drives are directly added or removed like tape cartridge from each drive bay with no special tool
  • Connect to system via three eSATA or USB 3.0/2.0 ports
RAID Tower IX (RT93DAEU3) thumbnail

RAID Tower IX (RT93DAEU3)

The RT93DAEU3 supports up to 15 3.5" SATA drives, uses Disk Array 5SA for drives installed onto drive trays that can be added or removed like tape cartridge from each drive bay, and eSATA connection to the computer.

  • Install up to fifteen 3.5" SATA drives of any capacity
  • Drives are installed onto drive trays that can be added or removed like tape cartridge from each drive bay
  • Connect to system via three eSATA ports
Secure NAS 2R5 thumbnail

Secure NAS 2R5

The Secure NAS 2R5, model SN10355E1G, accommodates up to Ten 3.5" SATA hard drives. All five drives are configured in a single RAID volume for high performance and reliability...encrypted by a FIPS certified AES 256-bit crypto engine...

  • Install up to five 3.5" SATA hard drives
  • Network Attached Storage via Fast Ethernet 10/100/1000 Mbps
  • Attach to any system via eSATA port
  • FIPS certified AES 256-bit hardware encryption for the entire RAID volume
NAS Tower 3R5 thumbnail

NAS Tower 3R5

This NAS Tower 3R5, model NT15SNES1G, accommodates up to fifteen 3.5" SATA hard drives. Each five drives set is configured in a single RAID volume for high performance and reliability. By using RAID 5 configuration, a storage volume up to 48 TB can be created.

    The NAS Tower is a family of storage appliance from Addonics that combines the benefits of RAID storage, Network Attached Storage (NAS) and Direct Attached Storage (DAS) all in box. By directly attaching to system via high speed eSATA connection, large volume of data can be transferred quickly onto the NAS Tower. The same data can be shared over LAN by connecting to the network port on the NAS Tower. Every NAS Tower is equipped with a USB port that allows for attaching as many as fifteen (15) USB drives onto the LAN. The NAS Tower is a great solution for data archiving, video storage or applications that require plenty of storage space or attaching large amount of storage onto network,

    About this model

    This NAS Tower 3R5, model NT15SNES1G, accommodates up to fifteen 3.5" SATA hard drives. The drives are grouped into three set and each five drives set is configured in a single RAID volume for high performance and reliability. By using RAID 5 configuration, the total combined storage capacity up to 48 TB can be created by using fifteen 4TB hard drives. The three RAID volumes can be directly attached to any system via eSATA or shared over the LAN via any 10/100/1000 network.

    Additional USB drives can be shared over the network by attaching to the USB port on the back of the unit. As many as sixteen (16) total drive volume can be shared over the network.

    Illustraion of connecting the NAS Tower to LAN or to system

    NAS Tower R5 fron and back detail view