Sub Category List
DISPLAY STYLE
PRODUCT FILTER
Reset
Show All
RAID Tower IV

The RAID Tower IV is built basing on the Storage Tower platform that features four 5.25" drive bays in a lightweight aluminum and compact chassis with a stylish and functional front bezel. Depending on the model, up to six 3.5" hard drives can be installed into the RAID Tower IV. The drives can be configured as a RAID set and be connected to the computer via a single USB 3.0, USB 2.0 or the high speed eSATA connection. Each model comes with everything needed for connecting to the computer. All is needed is to add your own hard drives and configure the RAID via either a simple on board rotary switch or software utility depending on the model.

RAID Tower IV
RAID Tower IV (RTIV535HEU3) thumbnail

RAID Tower IV (RTIV535HEU3)

The RTIV535HEU3 supports up to five SATA 3.5" drives. 3 drives are installed onto drive trays and added or removed like a tape cartridge. The other 2 are directly installed using Snap-In. It connects to the computer via USB 3.0/2.0 or eSATA.

  • Connect to system via USB 3.0 / 2.0 or eSATA port
  • Install up to five 3.5" SATA hard drives of any capacity
RAID Tower IV (RTIV35M2SU3) thumbnail

RAID Tower IV (RTIV35M2SU3)

The RTIV35M2SU3 supports up to three SATA 3.5" drives and two 2.5" drives. The drives are directly inserted and removed using the Snap-In. It connects to the computer via USB 3.0/2.0 or eSATA.

  • Connect to system via USB 3.0 / 2.0 or eSATA port
  • Install up to three 3.5" SATA drives and two 2.5" SATA drives of any capacity
  • Drives are added or removed like tape cartridge from each drive bay with no tools required