DISPLAY STYLE
PRODUCT FILTER
Reset
New Products
Sapphire WRITE-PROTECT Drive Reader thumbnail

Sapphire WRITE-PROTECT Drive Reader

The Sapphire WRITE PROTECT Drive Reader, equipped with an interface bridge that disables the WRITE function on the hardware level, allows accessing data on any 3.5" or 2.5" SATA hard drives without the risk of accidentally erasing or altering the content...

  • Supports any 3.5" or 2.5" SATA I, II or III hard drives
  • Hot swap hard drive like tape cassette without restarting your system**
  • USB 3.0/2.0 connection
  • Rugged anodized aluminum construction
internal GigaNAS adapter thumbnail

internal GigaNAS adapter

This internal GigaNAS adapter is a simple solution for custom build your own high high capacity Gigabit Network Attached Storage appliance. Come with all the necessary mounting brackets, this Giga NAS adapter can be mounted into any computer chassis ...

  • Attach up to 16 storage devices onto LAN
  • > 85 MB/sec speed on 1G network
  • Support single drive volume over 16TB
  • Same folder can be set up for sharing over LAN or WAN simultaneously
Dual mSATA - SATA Adapter thumbnail

Dual mSATA - SATA Adapter

Model: AD2MSAHDR
This Dual mSATA - SATA Adapter is designed to enable two mSATA (mini SATA) SSDs to be installed into the space of a 2.5" hard drive. The two mSATA SSD can be configured to form a single RAID volume...

  • Install up to two mSATA (mini SATA) SSDs
  • The two mSATA cards can be configured as RAID ), RAID 1, BIG DRIVE (SPAN) or as two individual drives*
  • The resulted RAID volume can be used as direct replacement for 2.5" hard drive
1:9 M2 /SSD/HDD HS Duplicator PRO thumbnail

1:9 M2 /SSD/HDD HS Duplicator PRO

Model: M2HU9HS-2S
This 1:9 M2 /SSD/HDD HS Duplicator PRO allows you to copy from one source media onto as many as nine (9) target media at one time. Comes bundled with ten (10) M2 flash drive kits to convert M2 (NGFF) card into a 2.5" SSD..

  • Copy up to nine (9) M2 (NGFF) or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • The supported media can be mixed in the target slots - great for transferring content between 2.5" HDD/SSD, M2 (NGFF) or other type of flash media
1:5 M2 (NGFF) /SSD/HDD Duplicator thumbnail

1:5 M2 (NGFF) /SSD/HDD Duplicator

Model: M2HDUS5HS
This 1:5 Combo M2 (NGFF) and 2.5" SSD/HDD duplicator allows you to copy from one source media onto as many as five (5) target media at one time.

  • Copy up to five M2 (NGFF) SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • The supported media can be mixed in the target slots - great for transferring content between M2 SSD and 2.5" SSD/HDD
1:9 mSATA /SSD/HDD HS Duplicator PRO thumbnail

1:9 mSATA /SSD/HDD HS Duplicator PRO

Model: MSHU9HS-2S
This 1:9 mSATA /SSD/HDD HS Duplicator PRO allows you to copy from one source media onto as many as nine (9) target media at one time...the source and target drive can be mSATA SSD, 2.5" SATA SSD or 3.5" SATA hard drive...

  • Copy up to nine (9) mSATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • Supported source media: mSATA SSD, 2.5" SSD, 2.5" hard drive and 3.5" hard drive
  • Supported target media: mSATA SSD. 2.5" SSD and 2.5" hard drive
mini mSATA USB 3.0 Flash drive thumbnail

mini mSATA USB 3.0 Flash drive

Model: AEMSU3
This mini flash enclosure turns any mSATA SSD into a small USB 3.0 Flash drive. Construct in rugged anodized aluminum housing, this mini flash drive is about the size of typical cigarette lighter and weight less than 2 oz.

  • Build your high speed Flash drive with mSATA SSD of your choice
  • High speed USB 3.0 - up to 5Gbps
  • Power directly from USB port
  • Size of a cigarette lighter
1:63 USB HDD / Flash Duplicator thumbnail

1:63 USB HDD / Flash Duplicator

Model: UDFH63
This 1:63 USB duplicator copies up to as many as sixty-three (63) USB storage devices at one time from a single USB source. Each USB port is designed to provide adequate power to operate self powered USB storage device...

  • Copy from one USB drive to as many as sixty-three (63) USB drives at one time
  • Support following USB storage: hard drive, SSD, flash drive and all popular flash cards connecting to Flash readers
2.5" M2 (NGFF) SSD drive thumbnail

2.5" M2 (NGFF) SSD drive

Model: AD25M2SSD
The unique 2.5" NGFF (M.2) Flash drive is designed to enable M2 (NGFF)SSD card to be used as a direct replacement for a 2.5" SATA hard drive.

  • Build your own 2.5" SATA SSD with NGFF (M.2) SSD of your choice
  • Replace 2.5" hard drive with low power and shock resistant mSATA SSD
  • Direct Notebook SATA hard drive replacement
SATA - M2 SSD adapter thumbnail

SATA - M2 SSD adapter

This Addonics SATA - M2 SSD adapter enable connecting the M2 SSD to any SATA port inside a computer. Once the M2 SSD is mounted inside this SATA - M2 SSD adapter, it can be used just like a standard 7 mm or 9 mm 2.5" SATA hard drive...

  • Connect M2 SSD into any SATA port
  • Support M2 (NGFF) in length of 30, 42, 60 and 80 mm
  • Replace any SATA hard drive with low power and shock resistant M2 (NGFF) SSD
Snap-In Disk Array PRO thumbnail

Snap-In Disk Array PRO

The Snap-In Disk Array PRO is the latest enhanced removable drive system that enable installing as many as five 3.5" hard drives into three 5.25" drive bays on any Desktop PC, Tower... system. Constructed in light weight and precision machined aluminum...

  • Install up to five 3.5” SATA or SAS hard drives into three 5 1/4" drive bay stack
  • Drive is added and removed directly from the Disk Array without any tool
  • Sturdy, light weight and precision machined aluminum construction
Sapphire Snap-In Mobile Rack thumbnail

Sapphire Snap-In Mobile Rack

The Sapphire Snap-in Mobile Rack is a convenient external removable hard drive system. Come in choice of model with eSATA connection or combination of both eSATA and USB 3.0 connections, hard drive can be conveniently added or removed from any system..

  • Supports any 3.5" SATA I, II or III hard drives
  • Hot swap hard drive like tape cassette without restarting your system**
  • Choice of eSATA or eSATA/USB 3.0 combo interface
  • Rugged anodized aluminum construction
Sapphire Cipher Snap-In thumbnail

Sapphire Cipher Snap-In

..a simple solution for securing any 3.5" or 2.5" SATA hard drive with FIPS certified AES 256-bit full disc hardware encryption, Drives are added or removed from the Sapphire Cipher Snap-In like a VHS cassette...

  • Prevent sensitive data from unauthorized access when the hard drive is lost or stolen
  • FIPS certified AES 256-bit hardware crypto engine
  • Supports any 3.5" or 2.5" SATA HDD or SDD*
  • eSATA and USB 3.0 connection
Sapphire Snap-In Disk Array with mini SAS  (S4SNMS) thumbnail

Sapphire Snap-In Disk Array with mini SAS (S4SNMS)

This Sapphire Disk Array comes equipped with a Hardware Port Multiplier (HPM) that connects all 4 drives to any computer via a single eSATA or USB 3.0 connection. The 4 drives can be set up to appear as individual drive to the system or can be set up ...

  • Attach up to 4 SATA 2.5" hard drive, SDD to any system via a single mini SAS (SFF-8088) cable
  • Drive can be inserted or removed like tape cartridge
  • OS independent, can be used on any system
Snap-In SATA Mobile Rack II thumbnail

Snap-In SATA Mobile Rack II

The Snap-In SATA Mobile Rack II is our second generation of trayless removable drive system for 3.5" SATA/SAS hard drives. Constructed in precision machined aluminum with an open frame design as well as a new door and eject mechanism ...

  • Supports any 3.5" SATA/SAS I, II or III hard drives
  • Mounts into any standard 5 1/4" drive bay
  • Hot swap hard drive like tape cassette without restarting your system
  • Connect to any SATA port
SATA Mobile Rack III thumbnail

SATA Mobile Rack III

The SATA Mobile Rack III is our third generation of removable drive system for 3.5" or 2.5" SATA/SAS hard drives. Constructed in precision machined aluminum with an open frame design, this new Mobile Rack is lighter, stronger, more durable...

  • Supports any 3.5" or 2.5" SATA I, II or III hard drives
  • Mounts into any standard 5 1/4" drive bay
  • Removable drive tray that supports mounting 3.5" or 2.5" drive
  • Connect to any SATA port
2.5" HDD/SSD Disk Array 4 thumbnail

2.5" HDD/SSD Disk Array 4

The new Addonics 2.5" Snap-In Disk Array is a high density removable hard drive system that supports installing up to four 2.5" SATA/SAS hard drives upto 15 mm height or 2.5" SSDs into one standard 5.25" drive bay...

  • Install as many as four 2.5" SATA/SAS hard drives or SSDs into a standard 5 1/4" drive bay
  • Support SATA I / II / III or SSD with drive height up to 15 mm
  • Light weight brushed aluminum construction
Sapphire 5-Slot CFast Drive thumbnail

Sapphire 5-Slot CFast Drive

a unique and flexible platform for creating your own solid state drive (SSD) using commercially available high speed CFast card. The five CFast cards can be configured to appear as five independent drives or as a RAID group...

  • Install up to five (5) CFast cards
  • CFast cards are added or removed from each slot without any special tool
  • CFast cards can be configured as RAID, a big drive or as five independent drives
  • choice of 6G eSATA or USB 3.0
Sapphire 5-Slot CF Drive thumbnail

Sapphire 5-Slot CF Drive

a unique and flexible platform for creating your own solid state drive (SSD) using commercially available CF (Compact Flash) card. The five CF cards can be configured to appear as five independent drives or as a RAID group...

  • Install up to five (5) CF (Compact Flash) cards
  • CF cards are added or removed from each slot without any special tool
  • CF cards can be configured as RAID, a big drive or as five independent drives
  • choice of 6G eSATA or USB
WiFi Drive Adapter thumbnail

WiFi Drive Adapter

The Addonics WiFi Drive Adapter is a handy network device. It is a great tool for wireless sharing of a USB drive or micro SD card. It can also be used as a wireless hot spot for connecting wireless device such as Notebook, Smart Phone or Tablets...

  • Turn any USB 2.0 hard drive, SSD, or a micro SD card into a WiFi storage device
  • Used as a wireless access point to the Internet
  • Great for Wireless file sharing on USB drive or micro SD card or streaming music or video...
Internal 5-port 6G Port Multiplier (PM) thumbnail

Internal 5-port 6G Port Multiplier (PM)

..Internal 5-SATA 6G PM (Port Multiplier) is the newest member that supports SATA 3.0 6Gbps data transfer rate....connect up to 5 SATA hard drives or optical drives into a single SATA port on a system board or on an add-in controller..

  • Connect up to 5 SATA hard drives or optical drives via a single SATA port
  • Up to 6 Gbits/sec when connecting to SATA 3.0 port supporting this speed
  • Mount onto any standard or low profile add-in card slot
Quad mSATA PCIe SSD thumbnail

Quad mSATA PCIe SSD

...a PCIe add-on card that supports connecting as many as four mSATA cards into any Desktop PC. Designed for installing in a PCI Express 4, 8 or 16 lanes slot...

  • Build your own SSD using commercially available mSATA cards
  • Add high capacity, fault tolerant and high performance SSD to any Desktop PC or server
  • Reduce system boot time and Increase system overall performance
mSATA - SATA converter thumbnail

mSATA - SATA converter

Converter to connect SATA device to mSATA connector

  • Connect any SATA storage via mSATA connector
  • Install directly into mSATA socket
5-Port 6G Rack Mount PM thumbnail

5-Port 6G Rack Mount PM

...supports connecting up to 5 SATA hard drives or SSD to a computer using one eSATA connection at SATA III speed of 6Gbps...

  • Connect up to 5 SATA HDD/SSD or optical drives to a computer via a single eSATA port
  • Up to 6 Gbits/sec when connecting to eSATA 3.0 port
  • mounted onto Addonics Storage Tower, Storage Rack or chassis with SCSI-I cut-out
Dual Hybrid HDD - mSATA SSD Controller thumbnail

Dual Hybrid HDD - mSATA SSD Controller

This Dual Hybrid HDD - mSATA SSD is a two port SATA III PCI-e host controller combined with two mSATA (mini SATA) SSD slots. It offers the benefits of high performance of a small capacity mSATA SSD and the low cost and high capacity of a standard hard drive.

  • Increase system overall performance by combining a small capacity high performance mini SATA SSD and a low-cost high-capacity hard drive
  • Supports Hybrid Drive, RAID0/1/10, individual drives
  • PM Support and NCQ
  • SATA 6Gbps
Internal 6G 4-Port SATA PCIe controller thumbnail

Internal 6G 4-Port SATA PCIe controller

This 4-Port SATA PCIe controller Comes with internal SATA ports to connect up to four SATA devices. The controller supports throughput up to 6Gbps when installed into PCI-Express 2.0 slots with 2 or more lanes...

  • 4 internal SATA ports on one PCIe add-on card
  • Supports 6 Gbps, 3 Gbps & 1.5 Gbps SATA hard drive
  • PCI-Express 2 lanes compatible (also fits into PCI-Express 4/8/16 Lane or the graphic card slot)
RAID Tower Mini (RTMPM6G) thumbnail

RAID Tower Mini (RTMPM6G)

This RAID Tower Mini is integrated with the latest 6G Port Multiplier (PM) to support high data rate of 6Gbps when connecting to a 6G eSATA port. All the drives are connected to the system via a single eSATA cable and appear as individual drive...

  • Connect to system via eSATA port
  • Install up to four 3.5" SATA HDD or SSD
  • Drives appear as 4 individual drives to the system
  • Up to 6Gbps throughput
RAID Tower III (RT3SN5P6G) thumbnail

RAID Tower III (RT3SN5P6G)

This RAID Tower III supports connecting up to five 3.5" SATA hard drives to the computer via a single high speed 6G eSATA connection. Drive is added or removed from the RAID Tower like tape cartridge with no special tool...

  • Install up to five 3.5" SATA hard drives of any capacity
  • Drives are added or removed like tape cartridge from each drive bay without any special tool
  • Connect to system via eSATA port
  • up to 6Gps throughput
RAID Tower IX  with 6G PM thumbnail

RAID Tower IX with 6G PM

Model: RT93SNE6G
This RAID Tower supports connecting up to fifteen 3.5" SATA drives to system with throughput up to 6 Gbps via three eSATA cables. With the three Snap-In Disk Arrays, drive can be added or removed like tape cartridges...

  • Install up to fifteen 3.5" SATA drives of any capacity
  • Drives are directly added or removed like tape cartridge from each drive bay with no special tool
  • Connect to system via three eSATA or USB 3.0/2.0 ports
RAID Tower IX 6G thumbnail

RAID Tower IX 6G

Model: RT93SN6GMS
This family of RAID Tower IX supports up to 15 3.5" SATA drives, uses Snap-In Disk Arrays for adding or removing drives directly like tape cartridges from each bay without any special tool, and one mini SAS connection...

  • Connect up to fifteen 3.5" SATA hard drives of any capacity to system with a mini SAS (SFF-8088) port
  • Maximum throughput up to 6Gbps (SATA 3)
  • Drives are directly added or removed like tape cartridge
M2 PCIe SSD - PCIe 3.0 4-Lane adapter thumbnail

M2 PCIe SSD - PCIe 3.0 4-Lane adapter

This M2 PCIe SSD adapter enable installing the M2 PCI SSD into a PCIe 4 lane slot of any Desktop system or server. Designed to accommodate M2 PCIe SSD in 42, 60 or 80 mm length,

  • Connect M2 SSD into any SATA port
  • Support M2 (NGFF) in length of 30, 42, 60 and 80 mm
  • Replace any SATA hard drive with low power and shock resistant M2 (NGFF) SSD
M2 (NGFF) - SATA converter thumbnail

M2 (NGFF) - SATA converter

Converter to connect SATA device to M2 (NGFF) host connector

  • Connect any SATA storage via M2 (NGFF) host connector
  • Install directly into M2 (NGFF) socket
Sapphire Snap-In Disk Array with 6G PM thumbnail

Sapphire Snap-In Disk Array with 6G PM

Model: S4SNPM6G This Sapphire Disk Array comes equipped with a rack-mount 6G Port Multiplier that connects all 4 drives to any computer via a single eSATA connection. The 4 drives appear as individual drive to the system...

  • Attach up to 4 SATA 2.5" hard drive, SDD to any system via a single eSATA connection - 4 drives can be configured as individual drives or as a RAID group
  • Drive can be inserted or removed like tape cartridge
Sapphire Disk Array 4SA with 6G PM thumbnail

Sapphire Disk Array 4SA with 6G PM

Model: S4DAPM6G This Sapphire Disk Array comes equipped with a rack-mount 6G Port Multiplier that connects all 4 drives to any computer via a single eSATA connection. The 4 drives appear as individual drive to the system...

  • Attach up to 4 SATA 2.5" hard drive, SDD to any system via a single eSATA connection - 4 drives can be configured as individual drives or as a RAID group
  • Drive can be inserted or removed like tape cartridge
1:11 M2 (NGFF) /SSD/HDD Duplicator thumbnail

1:11 M2 (NGFF) /SSD/HDD Duplicator

Model: M2HDU11
This 1:11 M2 /SSD/HDD HS Duplicator PRO allows you to copy from one source media onto as many as eleven (11) target media at one time. Comes bundled with twelve (12) M2 flash drive kits to convert M2 (NGFF) card into a ...

  • Copy up to eleven (11) M2 (NGFF) or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • The supported media can be mixed in the target slots - great for transferring content between HDD, M2 (NGFF) card or 2.5" SSD
1:9 mSATA /SSD/HDD HS Duplicator thumbnail

1:9 mSATA /SSD/HDD HS Duplicator

Model: MSHU9HS
This 1:9 mSATA /SSD/HDD HS Duplicator allows you to copy from one source media onto as many as nine (9) target media at one time. Comes bundled with ten (10) mSATA flash drive kits to convert mSATA SSD to a 2.5" SSD...

  • Copy up to nine (9) mSATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • Supported source media: mSATA SSD, 2.5" SSD and 2.5" hard drive
  • Comes with ten (10) units of 2.5" mSATA flash drive kits...
1:11 M2 (NGFF) /SSD/HDD Duplicator PRO thumbnail

1:11 M2 (NGFF) /SSD/HDD Duplicator PRO

Model: M2HDU11-2S
This 1:11 M2 /SSD/HDD high speed duplicator allows you to copy from one source media onto as many as eleven (11) target media at one time. Source and target media can be of either M2 SSD, 2.5" SATA SSD or HDD...

  • Copy up to eleven (11) M2 (NGFF) cards or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • The supported media can be mixed in the target slots - great for transferring content M2 card and 2.5" HDD/SSD
1:9  2.5" SSD/HDD HS Duplicator thumbnail

1:9 2.5" SSD/HDD HS Duplicator

Model: HU925HSDHS
This 1:9 2.5" SSD/HDD HS Duplicator PRO allows you to copy from one source media onto as many as nine (9) target media at one time.

  • Copy up to nine 2.5" SATA HDD/SSD with thickness up to 12.5 mm
  • High performance with minimum degradation in copying from one to nine targets
  • Support any file system
RAID Tower XIII with 6G PM and 4 eSATA connector thumbnail

RAID Tower XIII with 6G PM and 4 eSATA connector

Model: RT134SDES6G)
This RAID Tower supports up to twenty 3.5" SATA drives. Integrated with four Snap-In Disk Arrays, hard drive can added or removed like tape cartridges from each bay without any special tool.

  • Install up to twenty 3.5" SATA hard drives of any capacity
  • Drives are directly added or removed from each drive bay like tape cartridge with no special tool
  • Support SATA III (6 Gbps) data transfer when connecting to 6G eSATA
RAID Tower XIII thumbnail

RAID Tower XIII

Model: RT134SDMS6G
This RAID Tower XIII supports connecting up to twenty 3.5" SATA drives to system via a single external mini SAS connection. Integrated with four Snap-In Disk Array back plane and four 6G Port Multipliers for maximum data

  • Connect to system via a single mini SAS ports,
  • Drives are added or removed like tape cartridge from each drive bay with no special tool
  • Support SATA III (6 Gbps) data transfer when connecting to 6G eSATA port
1:5 2.5" HDD/SSD Duplicator thumbnail

1:5 2.5" HDD/SSD Duplicator

The 1:5 2.5" HDD/SSD duplicator with integrated Snap-In Double Drive allowing hard drives to be easily added or removed from the system just like an ordinary cassette tape.

  • 1:5 2.5" hard drive/SSD duplicator
  • Standalone appliance
  • Snap-In Double Drive for easy installation and removal of drive without requiring screws or tools
  • Support any 2.5" SATA hard drive or SSD with thickness up to 12.7 mm