DISPLAY STYLE
PRODUCT FILTER
Reset
Show All
Mounting brackets and screws
Mounting Brackets
Snap-In SATA Mobile Rack II thumbnail

Snap-In SATA Mobile Rack II

The Snap-In SATA Mobile Rack II is our second generation of trayless removable drive system for 3.5" SATA/SAS hard drives. Constructed in precision machined aluminum with an open frame design as well as a new door and eject mechanism ...

  • Supports any 3.5" SATA/SAS I, II or III hard drives
  • Mounts into any standard 5 1/4" drive bay
  • Hot swap hard drive like tape cassette without restarting your system
  • Connect to any SATA port
SATA Mobile Rack III thumbnail

SATA Mobile Rack III

The SATA Mobile Rack III is our third generation of removable drive system for 3.5" or 2.5" SATA/SAS hard drives. Constructed in precision machined aluminum with an open frame design, this new Mobile Rack is lighter, stronger, more durable...

  • Supports any 3.5" or 2.5" SATA I, II or III hard drives
  • Mounts into any standard 5 1/4" drive bay
  • Removable drive tray that supports mounting 3.5" or 2.5" drive
  • Connect to any SATA port
Snap-In 25 thumbnail

Snap-In 25

This Snap-In 25 is one of the most simple and versatile drive kit solutions in the market. Designed with the exact same dimensions and mounting hole locations of a 3.5" SATA hard drive, you can use this Snap-In 25 to install a 2.5" SATA hard drive into...

  • Use 2.5" SATA HDD or SSD as a direct replacement of 3.5" SATA HDD
  • Can be installed into any 3.5" removable hard drive system
  • Use it as a 2.5" removable drive system
  • Install into any standard 3.5" drive bay
  • Hot swappable
Snap-In 25 drive tray (AA25SN35TY) thumbnail

Snap-In 25 drive tray (AA25SN35TY)

Drive tray for the Snap-In 25 (model: AE25SN35SA)

Cipher Snap-In thumbnail

Cipher Snap-In

The Cipher Snap-In is another simple secured storage solution that combines the convenience of a removable drive system and the Addonics field proven CipherChain into a 5 1/4" drive rack. Once installed, any 3.5" SATA hard drive can be installed and removed...

  • Full Disk encryption
  • Choice of of models with ECB or CBC encryption mode
  • Supports encrypting 3.5" or 2.5" SATA HDD/SDD
  • AES 256-bit encryption that is FIPS 140-2, NIST and CSE certified
Multi-Media Bay thumbnail

Multi-Media Bay

This Multi-Media Bay is the perfect tool to pack more devices into any Desktop or small footprint computer. Mounted into a standard 5 1/4" drive bay, this Multi-Media Bay allows you to install a standard 3.5" SATA hard drive and a slim optical drive...

  • 5 1/4 bay system with slot for slim optical drive and integrated Snap-In mobile rack
  • Install any slim SATA or ATAPI optical drive and a 3.5" SATA hard drive into a single 5 1/4" drive bay
Snap-In SATA Mobile Rack  thumbnail

Snap-In SATA Mobile Rack

The Snap-In SATA Mobile Rack for 3.5" SATA hard drives is the best cost effective solution for hot swappable removable hard drive systems without the need for a hard drive enclosure. By attaching one of our optional converter boards to the back of the...

  • Supports any 3.5" SATA I, II or III hard drives
  • Hot swap hard drive like tape cassette without restarting your system
  • Choice of internal or external model
  • Internal model comes with SATA as native interface
ExpressCard 34 to ExpressCard 54 Adapter Bracket thumbnail

ExpressCard 34 to ExpressCard 54 Adapter Bracket

Add on bracket to enable most ExpressCard 34 to have a better fit into the ExpressCard 54 slot.

PCI Converter Bracket for SCSI-1 Bracket thumbnail

PCI Converter Bracket for SCSI-1 Bracket

PCI converter bracket, used with SCSI-I (Centronics 50-pin) bracket

Sliding Rails for Storage Rack thumbnail

Sliding Rails for Storage Rack

Sliding Rails installs onto rackmount equipment and provides a durable and convenient method to install and access Storage Rack chassis

  • Slide Rail installs onto rackmount equipment and provides a durable and convenient method to install and access rackmount chassis such as the Addonics Storage Rack
  • Mounting by Screw Application in General Frame
  • Heavy Duty...
Mounting Bracket for Slim ATAPI SATA - IDE Converter thumbnail

Mounting Bracket for Slim ATAPI SATA - IDE Converter

Secures the Slim ATAPI SATA - IDE Converter (ADSSSAI) onto a slimline SATA optical drive.

3.5" to 5.1/4" Drive Bay Mounting Bracket thumbnail

3.5" to 5.1/4" Drive Bay Mounting Bracket

3.5" to 5.1/4" drive bay mounting bracket for Internal DigiDrive, 2.5" Mobile Rack, Jupiter Drive Kit, Ruby Drive Kit, and other 3.5" removable drives.

3.5" to 5.1/4" Drive Bay Mounting Bracket for 3.5" Hard Drive thumbnail

3.5" to 5.1/4" Drive Bay Mounting Bracket for 3.5" Hard Drive

Constructed with strong metal frame for durability. This mounting bracket enable any 3.5" hard drive to be mounted into standard 5 1/4" drive bay on Desktop, Rack mounted PC or Kiosk equipment.

2.5" HDD/SSD slim or standard height bay bracket thumbnail

2.5" HDD/SSD slim or standard height bay bracket

This family of simple mounting bracket is designed to mount any 2.5" hard drive or SDD (Solid State Drive) onto the standard height or slim floppy bay commonly found in a desktop system.

  • Choice of slim floppy bay (model: AAMKSFHD25B) or standard 3.5" hard drive bay bracket (model: AAMKHD25B or AAMKHD25W)
  • Compatible with any 2.5" hard drive or SSD
  • Bracket comes with hard drive mounting screws
SCSI-1 Bracket for 5-Port HPM-XA thumbnail

SCSI-1 Bracket for 5-Port HPM-XA

SCSI-1 (Centronics 50-pin) bracket for mounting the following PM: AD5HPMSXA, AD5HPMRXA-E

SCSI-1 Bracket for 5-Port HPM  thumbnail

SCSI-1 Bracket for 5-Port HPM

SCSI-1 (Centronics 50-pin) bracket for mounting the following PM: AD5SAPM. AD5SARPM, AD5SAHPM-EA

SCSI-1 Back Panel for eSATA Port  thumbnail

SCSI-1 Back Panel for eSATA Port

SCSI-1 back panel for installing panel mount eSATA connector

2.5" SATA Hard Drive or SSD Mounting Bracket for Saturn Drive Enclosure thumbnail

2.5" SATA Hard Drive or SSD Mounting Bracket for Saturn Drive Enclosure

This bracket enables any 2.5" SATA hard drive to be mounted inside the Saturn Drive enclosure. Once installed, the 2.5" hard drive is used like a regular 3.5" hard drive, taking full advantage of the capability and flexibility of the Saturn Hard Drive kit.

  • Turn any 2.5" SATA or IDE hard drive into an external hard drive with USB 2.0, Firewire, SATA or CardBus connection via the Saturn Drive enclosure
  • Turn any 2.5" SATA or IDE hard drive into removable hard drive or drive...
SCSI-1 Back Plate for USIB Converter  thumbnail

SCSI-1 Back Plate for USIB Converter

Back plate for mounting Addonics IDE USIB or SATA USIB converter onto drive enclosure as a replacement for standard SCSI-I connector. Once installed, any IDE or SATA hard drives or optical drives can be converted to USB, Firewire or eSATA using one of the...

Storage Tower Back Panels thumbnail

Storage Tower Back Panels

Various storage tower back panels with pre-punched holes of different interface options.

Snap-In 25 RAID thumbnail

Snap-In 25 RAID

This Snap-In 25 RAID is one of the most simple and versatile drive kit solutions in the market. Designed with the exact same dimensions and mounting hole locations of a 3.5" SATA hard drive, you can use this Snap-In 25 to install a 2.5" SATA hard drive into...

  • Use 2.5" SATA HDD or SSD as a direct replacement of 3.5" SATA HDD
  • Can be installed into any 3.5" removable hard drive system
  • Use it as a dual 2.5" removable drive system
  • Install into any standard 3.5" drive bay
Flash Memory Mounting Brackets
Mounting Brackets for ADSAHDCF thumbnail

Mounting Brackets for ADSAHDCF

Various mounting brackets for ADSAHDCF

Mounting Bracket for ADSACF-N thumbnail

Mounting Bracket for ADSACF-N

3.5" bay mounting bracket for SATA - CF Adapter (ADSACF-N)

  • Mount SATA-CF adapter onto standard height 3.5" drive bay
  • Choice of black or ivory color
Mounting Brackets for ADIDECF-N thumbnail

Mounting Brackets for ADIDECF-N

3.5" drive bay mounting brackets for IDE-CF adapter, ADIDECF-N

  • Mount IDE-CF adapter into standard height 3.5" drive bay
  • Choice of black or ivory color
Slim ATAPI Mounting Bracket for ADIDESD thumbnail

Slim ATAPI Mounting Bracket for ADIDESD

Slim ATAPI mounting bracket for IDE to SD Adapter (black color bay bracket)

Slim CD Mounting Kit for AD2SAHDCF thumbnail

Slim CD Mounting Kit for AD2SAHDCF

Slim CD mounting kit for AD2SAHDCF for (black)

Slim CD Bay Mounting Bracket for AD44MIDE2CF thumbnail

Slim CD Bay Mounting Bracket for AD44MIDE2CF

This bracket is designed to fit perfectly inside any standard 3.5" hard drive bay, a great solution for replacing a 3.5" SATA hard drive with CF media in any desktop system.

Mounting Brackets for ADSACFASTHDD thumbnail

Mounting Brackets for ADSACFASTHDD

Mounting brackets for installing the SATA - CFast HDD adapter (ADSACFASTHDD)

  • For useing CFast card as a 2.5" SATA hard drive
  • For mounting CFast card onto a 3.5" drive bay as a non-removable media
Mounting Brackets for SATA-CFast adapter (ADSACFAST-N) thumbnail

Mounting Brackets for SATA-CFast adapter (ADSACFAST-N)

Mounting brackets for installing the SATA - CFast adapter (ADSACFAST-N)

  • Mounting brackets for installing the SATA - CFast adapter (ADSACFAST-N) onto standard 3.5" drive bay to enable using the CFast card as a removable storage media.
Screws
Screws thumbnail

Screws

screws for various brackets and storage devices