Home > Multi-Bay Enclosure > Disk Array (Back Plane)
Sub Category List
Disk Array
DISPLAY STYLE
PRODUCT FILTER
Reset
Show All
Disk Array (Back Plane)
Disk Array
Snap-In Disk Array thumbnail

Snap-In Disk Array

The Snap-In Disk Array is the latest Addonics removable drive system that enable installing as many as five 3.5" hard drives into three 5.25" drive bays in any Desktop PC, Tower or 4U Rack mount system. The hard drive can be added into the Snap-In Disk..

  • Install up to five 3.5” SATA or SAS hard drives into three 5 1/4" drive bay stack
  • Drive is added and removed directly from the Disk Array without any tool
  • Point to point connection
  • High throughput up to 600 MB/sec...
More Detail
Compact RAID thumbnail

Compact RAID

The Compact RAID is one of the smallest most versatile storage appliances on the market. It weighs just a little over a pound and is roughly the size of a 4" cube. Despite its compact size, the Compact RAID is packed with the power, features and...

  • Compact size - small enough to fit in your hand
  • Weigh less than 22 oz.
  • Install up to five 2.5" SATA hard drives or SSD of 9mm - 9.5mm height
  • Convenient RAID configuration via simple DIP switches
  • RAID or individual...
More Detail
Disk Array 5SA thumbnail

Disk Array 5SA

Addonics Disk Array 5SA system makes implementing sophisticated RAID technology into any computer as simple as counting 1,2,3. Designed to accommodate up to five 3.5" SATA or SATA II hard drives, each hard drive can be easily secured inside or removed from...

  • Disk Array 5SA - for installing 5 SATA or SAS hard drives into three 5 1/4" drive bay stack flipped horizontally*
  • Full Serial ATA 1.0, 2.0 and 3.0 compliant
  • Aluminum frame and drive drawer
More Detail
Disk Array 3SA thumbnail

Disk Array 3SA

Addonics Disk Array 3SA system makes implementing sophisticated RAID technology into any computer as simple as counting 1,2,3. Designed to accommodate up to three 3.5" SATA I,II or III hard drives into two 5 1/4" drive bay..

  • Install 3 SATA hard drives into two 5 1/4" drive bay stack
  • Full Serial ATA 1.0, 2.0 and 3.0 compliant
  • Aluminum frame and drive drawer
More Detail
2.5" Snap-In Disk Array thumbnail

2.5" Snap-In Disk Array

The new Addonics 2.5" Snap-In Disk Array is a high density removable hard drive system that supports installing up to four 2.5" SATA hard drives or SSDs into one standard 5.25" drive bay.

  • Install as many as four 2.5" SATA hard drives or SSDs into a standard 5 1/4" drive bay
  • Support SATA I / II / III or SSD with drive height up to 12.7 mm
More Detail