Addonics Category: Connector Converter

Connector Converter

Mini SAS and Multilane bridge

SATA - external mini SAS (SFF-8088) bridge

The Addonics family of SATA - external mini SAS bridges make implementing the reliable external mini SAS cabling between system and external SATA storage system easy and simple. Consists of a system version (for the host) and an enclosure version...

Converts up to four internal SATA ports to one mini-SAS (SFF-8088) 26-pin connector
Mounts on a PCI slot opening of a standard height desktop or low profile PC
Supports High Speed Transfer rate of 6Gbps

More Detail

Dual Mini SAS Converter

The Addonics family of SATA - external mini SAS converters make implementing the reliable external mini SAS cabling between system and external SATA storage easy and simple. Consists of a system version (for the host) and an enclosure version ...

Convert two External Mini SAS (SFF-8088) connectors into two Internal Mini SAS (SFF-8087) ports internally
Mounts on a PCI slot opening of a standard height desktop or low profile PC
Supports High Speed Transfer rate of 6Gbp

More Detail

4x Multilane Bridge for SATA Controller - Discontinued

Designed to convert 4 internal SATA ports to external multilane connector for Infiniband cabling system. Supports connection of 4 devices via 1 cable.

Converts up to 4 internal SATA ports to external 1 multilane connector
Mounts on a PCI slot opening of a standard height desktop or low profile PC
Drive access LEDs shows drive activity...

More Detail

2.5" hard drive to 3.5" hard drive adapter

Snap-In 25 RAID

This Snap-In 25 RAID is one of the most simple and versatile drive kit solutions in the market. Designed with the exact same dimensions and mounting hole locations of a 3.5" SATA hard drive, you can use this Snap-In 25 to install a 2.5" SATA hard drive into...

Use 2.5" SATA HDD or SSD as a direct replacement of 3.5" SATA HDD
Can be installed into any 3.5" removable hard drive system
Use it as a dual 2.5" removable drive system
Install into any standard 3.5" drive bay

More Detail

Snap-In 25

This Snap-In 25 is one of the most simple and versatile drive kit solutions in the market. Designed with the exact same dimensions and mounting hole locations of a 3.5" SATA hard drive, you can use this Snap-In 25 to install a 2.5" SATA hard drive into...

Use 2.5" SATA HDD or SSD as a direct replacement of 3.5" SATA HDD
Can be installed into any 3.5" removable hard drive system
Use it as a 2.5" removable drive system
Install into any standard 3.5" drive bay
Hot swappable

More Detail

Connector Converters

Embedded USB Type-A Adapter

A small module plug directly onto the 10-pin internal USB connector commonly found in motherboard, the embedded USB Type-A adapter instantly adds 2 standard USB type A port to a Desktop computer. Up to two USB Thumb drives can now be installed inside any...

Install up to two devices with USB Type-A connection onto internal USB 9-pin header connector
Allow upt to 2 USB Thumb drives to be used as internal Solid State Drive (SSD) inside Desktop, Server, Rack mounted PC, Kiosk or...

More Detail

4 eSATA Port Bracket for HDD

The 4 eSATA Port Bracket for HDD is an adapter used for conversion of SATA devices into eSATA connection. Can be used with the Mini Storage Tower, Storage Tower, or Storage Rack.

Convert Serial ATA devices into the new eSATA connection
Perfect for implementation into Mini Storage Tower for external eSATA connection to computer
SATA 1.0 and SATAII Compliant
Supports High Speed Transfer of...

More Detail

1.8" ZIF to 2.5" IDE Hard Drive Connector Converter

Need to read/write or retrieve data from the 1.8" Toshiba™ hard drive that is inside your Apple™ iPOD™ or Notebook computer? The new Toshiba 1.8" ZIF to 2.5" IDE connector converter will convert the ZIF connector into 2.5" IDE interface and...

Enable Toshiba 1.8" hard drive to be used like a 2.5" IDE hard drive
Convert the ZIF connector (commonly found on the new 1.8" hdd in iPOD) to 44-pin IDE (same connector as standard 2.5" IDE Notebook hard drive)...

More Detail

1.8" ZIF - CF Adapter

Replace the ZIF hard drive contained inside your Apple iPOD or many portable devices with the fast, reliable, and high speed Compact Flash supporting PIO, DMA, or UDMA4 for up to 40MB/s transfer rate.

Install Compact Flash into a device which uses a 1.8" hard drive with ZIF connector
Can be used like a 2.5" hard drive using the optional ZIF to 2.5" IDE connector converter
Compatible with Apple iPOD™
Can be installed...

More Detail

Internal mini SAS to SATA Cable

Internal mini SAS (SFF-8087) to internal mini SAS cable (straight through cable) Internal mini SAS to 4 SATA connectors cable - choice for connecting to SATA host or SATA device

More Detail

External mini SAS - Infiniband (Multiane) cable

External mini SAS (SFF-8088) to Infiniband Multilane (SFF-8470). Choice of 150 cm. and 300 cm. cable length.

Connecting cables to convert External Mini SAS (SFF-8088) to Multilane connector (SFF-8470)

More Detail

2.5" to 3.5" IDE HDD Converter kit

This converter enables any 2.5" IDE hard drive to be used like a standard 3.5" hard drive.

Compatible with any 2.5" hard drive or SSD
Fit any systems with standard 3.5" drive bay
Choice of slim floppy bay or standard height bay bracket
Bracket comes with hard drive mounting screws
Choice of ivory or...

More Detail

44 pin - 40 pin IDE cable

Convert IDE 44 pin male to IDE 40 pin male with 4P female molex power connector

connect storage device with 44 pin IDE with standard 40-pin IDE cable
4P female molex power connector to provide power to the 44-pin storage device

More Detail

Hybrid Port (power over eSATA) Converters

Hybrid Port Converter

This Addonics Hybrid Port converter instantly adds an eSATA USB Hybrid Port (EUHP)to any Desktop system, the same Hybrid port commonly found on many new generations of Notebook computers. The Addonics Hybrid Port converter can be easily added via PCI slot...

Add Hybrid port to Desktop system or computing equipment
Add Hybrid port to external storage enclosure
Choice of model with standard 3.5" drive bay bracket or PCI/SCSI-1 mounting bracket
Support hot swap of eSATA device*

More Detail

SATA or IDE to USIB converter

SATA or IDE to USIB Connector Converter PCB

The Addonics SATA - USIB Connector Converter instantly turns any SATA storage device into the Addonics USIB (Universal Serial Interface BUS) connection. With this converter, any SATA storage devices can be conveniently connected to USB, Firewire or eSATA...

Convert SATA or IDE devices to USIB interface
Choice of converters for SATA or IDE devices
SATA - USIB connector converter supports any SATA device such as SATA hard drive, optical drive, SSD.
IDE - USIB...

More Detail

Saturn Drive Kit Connectors

Saturn Hot Swap Converter Kit

Our Saturn Hot Swap Converter Kits provide Saturn IDE Drive Cradle users with the ability to create a hot swappable removable hard drive system using the Saturn IDE Extender board. IDE models of the Saturn Combo Hard Drive System and Saturn Mobile Rack are...

More Detail

Saturn IDE to USIB Connector

On some small footprint desktop and mini tower systems, there may be limited clearance behind the Saturn USIB drive cradle drive bay to accomodate the Saturn USIB drive cradle and the USIB interface cable.The Saturn IDE to USIB Connector solves the limited...

More Detail